Valid product registration or software purchase required to use CustomTone.


  • Created with: Helix
  • Author:
  • Date: 1/17/18
  • Downloads: 934
  • Addons:

    Model Packs increase the number of Amp or FX Models of a GuitarPort, TonePort, PODxt, PODxt Live or PODxt Pro, for a wider variety of tone possibilities. When a particular tone in the library relies on a Model available in one of these packs, you'll see symbol(s) to indicate which Packs: MS (Metal Shop), CC (Classics Collection), FX (FX Junkie), and PP (Power Pack).

    The models within the FX Junkie Model Pack are already included in PODxt Live, and offered for purchase to add-on to GuitarPort, TonePort, PODxt and PODxt Pro.

    Variax is the uniquely flexibile guitar from Line 6. Our Vetta II amplifier includes a digital connection for the Variax that lets you store settings for both your amp and your guitar in the Vetta II so that when you call up a Vetta Channel Memory your amp and guitar can change sounds together. Vetta II Tones marked with this guitar symbol include this Variax data.

    For each tone in the library, you'll see an icon for either a single coil or humbucker pickup. This tells you whether the tone is best for use with a single coil pickup or a humbucker, so you can select the appropriate pickup on your guitar when using this tone.

    Attention POD 2.0, Flextone and HD147 owners... Your hardware doesn't do Stomp effects, so you'll hear something different than what was intended. Try increasing the Drive or choose a higher gain Amp Model to get the right sound. The other aspects of the sound should translate as expected, so you'll at least get a great starting place for tweaking.

  • Comments:
    Not a finished work by any means, but this is my attempt to build a patch that was somewhat the "Ultimate Marshall"... combining several different popular Marshall tones into a single snapshot based preset. This uses a stock Helix Cab (4x12 1960 T75) but also sounds good with a number of popular IRs that are out there. This uses 3 different amp models in series (one at a time)... First there is the JTM 45 (J45) amp. This is used in the first two snapshots - a "Clean" and a "Crunch" snapshot. Next (for the 3rd "Plxi Drive" snapshot) is the Brit Plexi Jump amp model. and finally a Brit 2204 for the 4th snapshot that I call "JCM Drive". The Timmy (Teemah) pedal is programmed to come with this one, but is also available via stomp switch to use with any of the first three snapshots. A Kinky Boost (EP Boost) pedal is always on with various settings, and a Tremolo and Chorus are available via footswitch also. Finally there is a Wah first in the chain (my favorite is the Crybaby (Weeper). Give it a try and let me know if you find other ways to configure. This was built with a QSC K-series PA speaker and a P90 LP Jr. I have it in "Stomp/Snap" mode with the 4 snaps on the bottom row.

Tone successfully deleted

Delete this tone forever?

Yes / No
There was a problem deleting the tone.


Tones contributed by users to the Public Tone Exchange are made by individual users, who are in no way affiliated with Line 6. Any product name or trademarks used by the users to describe their Tones are the sole property of their respective owners. Any use of these product names or trademarks of other manufacturers should not be construed as an endorsement, association or affiliation with Line 6.