FREE SOFTWARE DOWNLOADS

Go
  • Beta
  • Archived

Here are your search results:

Helix Native      
Helix Native
Version 1.92
Released 5/19/20

Works with:
No Hardware Required

Helix/HX Firmware 2.92

Helix/HX 2.92 and Helix Native 1.92 include important bug fixes, and are strongly recommended for all Helix and HX owners. Doesn't matter what firmware your Helix/HX product is currently running; you can go straight to 2.92.

 

IMPORTANT! Carefully read and follow the update instructions below. If you don't—and then run to the forums asking why it's not working—the interwebs will make fun of you.

 

Updating Helix/HX Firmware to 2.92

Helix Floor, Helix Rack, Helix LT, HX Effects, HX Stomp

STEP 1—Updating HX Edit to 2.92 (assuming you haven't done this already)

  1. Log onto line6.com, download, and install HX Edit 2.90:

 

STEP 2—Updating Helix/HX Firmware to 2.92

  1. If you have Helix Rack/Control, turn off Helix Control. Also, shut down all Line 6 software or any programs that use audio, like DAWs, iTunes, Spotify, video games, etc.
  2. Connect your Helix/HX device to a Mac or PC via USB (do not use any sort of USB hub, which may include the front USB ports on towers) and turn it on.
  3. Launch the new version of HX Edit 2.92 you installed in Step 1 above. If you're not signed in, click "Check for Updates" in the lower right corner and sign in. If you're already signed in, a dialog panel appears, indicating an update is available.
  4. Click "Update Now." A window appears, asking you to back up your Helix/HX hardware. Click OK, optionally rename the backup and/or choose a different destination folder, and then click "Create Backup." IMPORTANT! Note the location where you've saved the backup.
  5. Continue following the prompts. Once updated, the window reads "Update Complete" and your Helix/HX hardware begins rebuilding its presets; wait for this to complete and click "Back to HX Edit."
  6. From the File pull-down menu, click "Restore from backup..." A dialog appears. Click "Restore Backup" and then "Yes."
  7. Once the restore has finished, turn your Helix/HX product off and then on again.
  8. If you have Helix Control connected to Helix Rack, turn on Helix Control. Helix Rack reads "Helix Control must be updated to work properly." Press Knob 6 (OK).

 

Bug Fixes in 2.92

  • When Global Settings > Footswitches > Stomp Select is set to "Off" or "Press," touch-holding switches could still result in assignment and swap dialogs—FIXED
  • The TAP LED in Helix Floor, Rack/Control, and LT could flash slightly slower than the actual tempo—FIXED
  • In HX Effects' Command Center, Hotkey commands could display values for HX Preset commands—FIXED
  • In HX Effects' Command Center, assigning a hold-type HX command could sometimes not engage properly—FIXED
  • Engaging the MODE switch while Global Settings were visible could result in unexpected behavior—FIXED
  • Engaging the MODE switch after selecting a different model during a bank queue could result in unexpected behavior—FIXED
  • In rare cases, bypass and parameter changes made from Helix Floor, Rack, or LT may not be reflected in HX Edit—FIXED
  • On Helix Floor and Helix Control's 1 Switch Looper scribble strip, Undo or Redo text could appear—FIXED
  • In HX Effects' Command Center, adding an HX hold-type command could result in an inverted switch state—FIXED
  • In HX Effects' Command Center, adding an HX Snapshot command could result in the wrong LED color—FIXED
  • In HX Effects' Command Center, engaging a HX Looper > 1/2 Speed or Full speed command could sometimes cause a lockup—FIXED
  • In rare cases on Helix Floor, Rack, or LT, renaming a snapshot could result in a preset change—FIXED
  • The polarity of some amp models was reversed in 2.91—FIXED
  • Dynamics > Rochester Comp could exhibit audible phase cancellation when its Mix parameter is set to 100%—FIXED
  • Dynamics > Rochester Comp now behaves as expected when the Ratio is set lower than 3:1—FIXED
  • In rare cases, scrolling quickly through the model list in HX Edit could cause the hardware to stop responding—FIXED
  • The Looper > 1 Switch Looper LED states would not function properly when controlled via incoming MIDI CCs—FIXED

 

Known Issues in 2.92

  • A slight thump can be heard when loading a Distortion > Kinky Boost, Arbitrator Fuzz, or Tycoctavia Fuzz model
  • While backing up, the scribble strip on FS8 can sometimes flicker (Helix Floor, Helix Rack/Control)
  • In very rare cases, leaving the unit on for many hours can sometimes cause reverb models to cease outputting audio
  • In a preset with two IRs blocks, moving one IR block to Path B can sometimes cause the other IR block to reset its Impulse Response to slot 1
  • In rare cases, after exporting and then importing presets using HX Edit, the Split block's bypass state can sometimes change (Helix Floor, Helix Rack/Control, Helix LT)
  • When using Blue Cat Audio's PatchWork VST host software, resizing the Helix Native window may not scale smoothly (Helix Native)

Compatible OS: Mac OS X, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra, macOS Mojave
( 45 MB )

Get Download




Helix Native      
Helix Native
Version 1.92
Released 5/19/20

Works with:
No Hardware Required

Helix/HX Firmware 2.92

Helix/HX 2.92 and Helix Native 1.92 include important bug fixes, and are strongly recommended for all Helix and HX owners. Doesn't matter what firmware your Helix/HX product is currently running; you can go straight to 2.92.

 

IMPORTANT! Carefully read and follow the update instructions below. If you don't—and then run to the forums asking why it's not working—the interwebs will make fun of you.

 

Updating Helix/HX Firmware to 2.92

Helix Floor, Helix Rack, Helix LT, HX Effects, HX Stomp

STEP 1—Updating HX Edit to 2.92 (assuming you haven't done this already)

  1. Log onto line6.com, download, and install HX Edit 2.90:

 

STEP 2—Updating Helix/HX Firmware to 2.92

  1. If you have Helix Rack/Control, turn off Helix Control. Also, shut down all Line 6 software or any programs that use audio, like DAWs, iTunes, Spotify, video games, etc.
  2. Connect your Helix/HX device to a Mac or PC via USB (do not use any sort of USB hub, which may include the front USB ports on towers) and turn it on.
  3. Launch the new version of HX Edit 2.92 you installed in Step 1 above. If you're not signed in, click "Check for Updates" in the lower right corner and sign in. If you're already signed in, a dialog panel appears, indicating an update is available.
  4. Click "Update Now." A window appears, asking you to back up your Helix/HX hardware. Click OK, optionally rename the backup and/or choose a different destination folder, and then click "Create Backup." IMPORTANT! Note the location where you've saved the backup.
  5. Continue following the prompts. Once updated, the window reads "Update Complete" and your Helix/HX hardware begins rebuilding its presets; wait for this to complete and click "Back to HX Edit."
  6. From the File pull-down menu, click "Restore from backup..." A dialog appears. Click "Restore Backup" and then "Yes."
  7. Once the restore has finished, turn your Helix/HX product off and then on again.
  8. If you have Helix Control connected to Helix Rack, turn on Helix Control. Helix Rack reads "Helix Control must be updated to work properly." Press Knob 6 (OK).

 

Bug Fixes in 2.92

  • When Global Settings > Footswitches > Stomp Select is set to "Off" or "Press," touch-holding switches could still result in assignment and swap dialogs—FIXED
  • The TAP LED in Helix Floor, Rack/Control, and LT could flash slightly slower than the actual tempo—FIXED
  • In HX Effects' Command Center, Hotkey commands could display values for HX Preset commands—FIXED
  • In HX Effects' Command Center, assigning a hold-type HX command could sometimes not engage properly—FIXED
  • Engaging the MODE switch while Global Settings were visible could result in unexpected behavior—FIXED
  • Engaging the MODE switch after selecting a different model during a bank queue could result in unexpected behavior—FIXED
  • In rare cases, bypass and parameter changes made from Helix Floor, Rack, or LT may not be reflected in HX Edit—FIXED
  • On Helix Floor and Helix Control's 1 Switch Looper scribble strip, Undo or Redo text could appear—FIXED
  • In HX Effects' Command Center, adding an HX hold-type command could result in an inverted switch state—FIXED
  • In HX Effects' Command Center, adding an HX Snapshot command could result in the wrong LED color—FIXED
  • In HX Effects' Command Center, engaging a HX Looper > 1/2 Speed or Full speed command could sometimes cause a lockup—FIXED
  • In rare cases on Helix Floor, Rack, or LT, renaming a snapshot could result in a preset change—FIXED
  • The polarity of some amp models was reversed in 2.91—FIXED
  • Dynamics > Rochester Comp could exhibit audible phase cancellation when its Mix parameter is set to 100%—FIXED
  • Dynamics > Rochester Comp now behaves as expected when the Ratio is set lower than 3:1—FIXED
  • In rare cases, scrolling quickly through the model list in HX Edit could cause the hardware to stop responding—FIXED
  • The Looper > 1 Switch Looper LED states would not function properly when controlled via incoming MIDI CCs—FIXED

 

Known Issues in 2.92

  • A slight thump can be heard when loading a Distortion > Kinky Boost, Arbitrator Fuzz, or Tycoctavia Fuzz model
  • While backing up, the scribble strip on FS8 can sometimes flicker (Helix Floor, Helix Rack/Control)
  • In very rare cases, leaving the unit on for many hours can sometimes cause reverb models to cease outputting audio
  • In a preset with two IRs blocks, moving one IR block to Path B can sometimes cause the other IR block to reset its Impulse Response to slot 1
  • In rare cases, after exporting and then importing presets using HX Edit, the Split block's bypass state can sometimes change (Helix Floor, Helix Rack/Control, Helix LT)
  • When using Blue Cat Audio's PatchWork VST host software, resizing the Helix Native window may not scale smoothly (Helix Native)

Compatible OS: Windows 7, Windows 8, Windows 10
( 36 MB )

Get Download




Helix Native      
Helix Native
Version 1.91
Released 4/24/20

Works with:
No Hardware Required

Helix/HX 2.91

Helix/HX 2.91 includes important bug fixes, and is strongly recommended for all Helix and HX owners.

IMPORTANT!

Carefully read and follow the update instructions below. If you don’t — and then run to the forums asking why it’s not working—the interwebs will make fun of you.

Updating to 2.91

Helix Floor, Helix Rack, Helix LT, HX Effects, HX Stomp

STEP 1 — Updating HX Edit to 2.90 (assuming you haven’t done this already)

  1. Log onto line6.com , download, and install HX Edit 2.90:

STEP 2 — Updating Helix/HX Firmware to 2.91

  1. If you have Helix Rack/Control, turn off Helix Control. Also, shut down all Line 6 software or any programs that use audio, like DAWs, iTunes, Spotify, video games, etc.
  2. Connect your Helix/HX device to a Mac or PC via USB (do not use any sort of USB hub, which may include the front USB ports on towers) and turn it on.
  3. Launch the new version of HX Edit 2.90 you installed in Step 1 above. If you’re not signed in, click “Check for Updates” in the lower right corner and sign in. If you’re already signed in, a dialog panel appears, indicating an update is available.
  4. Click “Update Now.” A window appears, asking you to back up your Helix / HX hardware. Click OK, optionally rename the backup and / or choose a different destination folder, and then click “Create Backup.” IMPORTANT! Note the location where you’ve saved the backup.
  5. Continue following the prompts. Once updated, the window reads “Update Complete” and your Helix / HX hardware begins rebuilding its presets; wait for this to complete and click “Back to HX Edit.”
  6. From the File pull-down menu, click “Restore from backup…” A dialog appears. Click “Restore Backup” and then “Yes.”
  7. Turn your Helix / HX product off and then on again.
  8. If you have Helix Control connected to Helix Rack, turn on Helix Control. Helix Rack reads “Helix Control must be updated to work properly.” Press Knob 6 (OK).

Bug Fixes in 2.91

  • Resolves multiple unexpected behavior that can occur when adjusting the Volume knob, entering the Tuner, or other actions during the first 30 seconds after power up—FIXED
  • Engaging the Tap Tempo switch would calculate a different tempo than intended—FIXED
  • When routing Path 1 to Path 2, the Path 2A andor Path 2B input blocks could display clipping even when the signal was not—FIXED/
  • For presets with parallel paths, the Mixer > Merge block boosts signals by 3dB—FIXED

Known Issues in 2.91

  • A slight thump can be heard when loading a Distortion > Kinky Boost, Arbitrator Fuzz, or Tycoctavia Fuzz model
  • While backing up, the scribble strip on FS8 can sometimes flicker (Helix Floor, Helix RackControl)/
  • In very rare cases, leaving the unit on for many hours can sometimes cause reverb models to cease outputting audio
  • In a preset with two IRs blocks, moving one IR block to Path B can sometimes cause the other IR block to reset its Impulse Response to slot 1
  • In rare cases, after exporting and then importing presets using HX Edit, the Split block’s bypass state can sometimes change (Helix Floor, Helix RackControl, Helix LT)/
  • When using Blue Cat Audio’s PatchWork VST host software, resizing the Helix Native window may not scale smoothly (Helix Native)
  • The Looper block’s Overdub function does not currently respond to incoming MIDI (HX Stomp)
  • While connected to HX Edit, quickly changing models through the IR block can sometimes result in a unit freeze (HX Stomp)

Compatible OS: Windows 7, Windows 8, Windows 10
( 36 MB )

Get Download




Helix Native      
Helix Native
Version 1.91
Released 4/24/20

Works with:
No Hardware Required

Helix/HX 2.91

Helix/HX 2.91 includes important bug fixes, and is strongly recommended for all Helix and HX owners.

IMPORTANT!

Carefully read and follow the update instructions below. If you don’t — and then run to the forums asking why it’s not working—the interwebs will make fun of you.

Updating to 2.91

Helix Floor, Helix Rack, Helix LT, HX Effects, HX Stomp

STEP 1 — Updating HX Edit to 2.90 (assuming you haven’t done this already)

  1. Log onto line6.com , download, and install HX Edit 2.90:

STEP 2 — Updating Helix/HX Firmware to 2.91

  1. If you have Helix Rack/Control, turn off Helix Control. Also, shut down all Line 6 software or any programs that use audio, like DAWs, iTunes, Spotify, video games, etc.
  2. Connect your Helix/HX device to a Mac or PC via USB (do not use any sort of USB hub, which may include the front USB ports on towers) and turn it on.
  3. Launch the new version of HX Edit 2.90 you installed in Step 1 above. If you’re not signed in, click “Check for Updates” in the lower right corner and sign in. If you’re already signed in, a dialog panel appears, indicating an update is available.
  4. Click “Update Now.” A window appears, asking you to back up your Helix / HX hardware. Click OK, optionally rename the backup and / or choose a different destination folder, and then click “Create Backup.” IMPORTANT! Note the location where you’ve saved the backup.
  5. Continue following the prompts. Once updated, the window reads “Update Complete” and your Helix / HX hardware begins rebuilding its presets; wait for this to complete and click “Back to HX Edit.”
  6. From the File pull-down menu, click “Restore from backup…” A dialog appears. Click “Restore Backup” and then “Yes.”
  7. Turn your Helix / HX product off and then on again.
  8. If you have Helix Control connected to Helix Rack, turn on Helix Control. Helix Rack reads “Helix Control must be updated to work properly.” Press Knob 6 (OK).

Bug Fixes in 2.91

  • Resolves multiple unexpected behavior that can occur when adjusting the Volume knob, entering the Tuner, or other actions during the first 30 seconds after power up—FIXED
  • Engaging the Tap Tempo switch would calculate a different tempo than intended—FIXED
  • When routing Path 1 to Path 2, the Path 2A andor Path 2B input blocks could display clipping even when the signal was not—FIXED/
  • For presets with parallel paths, the Mixer > Merge block boosts signals by 3dB—FIXED

Known Issues in 2.91

  • A slight thump can be heard when loading a Distortion > Kinky Boost, Arbitrator Fuzz, or Tycoctavia Fuzz model
  • While backing up, the scribble strip on FS8 can sometimes flicker (Helix Floor, Helix RackControl)/
  • In very rare cases, leaving the unit on for many hours can sometimes cause reverb models to cease outputting audio
  • In a preset with two IRs blocks, moving one IR block to Path B can sometimes cause the other IR block to reset its Impulse Response to slot 1
  • In rare cases, after exporting and then importing presets using HX Edit, the Split block’s bypass state can sometimes change (Helix Floor, Helix RackControl, Helix LT)/
  • When using Blue Cat Audio’s PatchWork VST host software, resizing the Helix Native window may not scale smoothly (Helix Native)
  • The Looper block’s Overdub function does not currently respond to incoming MIDI (HX Stomp)
  • While connected to HX Edit, quickly changing models through the IR block can sometimes result in a unit freeze (HX Stomp)

Compatible OS: Mac OS X, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra, macOS Mojave
( 45 MB )

Get Download




Helix Native      
Helix Native
Version 1.90
Released 4/21/20

Works with:
No Hardware Required

Helix / HX 2.90 | Helix Native 1.90

“The Always Level Presets By Ear at Stage Volume with the Rest of the Band Playing Update”

Helix / HX 2.90 and Helix Native 1.90 include new amps, cabs, effects, features, and bug fixes, and is strongly recommended for all Helix and HX owners.

Updating to 2.90

Helix Floor, Helix Rack, Helix LT, HX Effects, HX Stomp

STEP 1 — Updating HX Edit to 2.90

  1. Log onto line6.com, download, and install HX Edit 2.90:

STEP 2 — Updating Helix / HX Firmware to 2.90

  1. If you have Helix Rack/Control, turn off Helix Control. Also, shut down all Line 6 software or any programs that use audio, like DAWs, iTunes, Spotify, video games, etc.
  2. Connect your Helix/HX device to a Mac or PC via USB (do not use any sort of USB hub, which may include the front USB ports on towers) and turn it on.
  3. Launch the new version of HX Edit 2.90 you installed in Step 1 above. If you’re not signed in, click “Check for Updates” in the lower right corner and sign in. If you’re already signed in, a dialog panel appears, indicating an update is available.
  4. Click “Update Now.” A window appears, asking you to back up your Helix/HX hardware. Click OK, optionally rename the backup and / or choose a different destination folder, and then click “Create Backup.”
  5. Continue following the prompts. Once updated, the window reads “Update Complete” and your Helix / HX hardware begins rebuilding its presets; wait for this to complete and click “Back to HX Edit.”
  6. If you have Helix Control connected to Helix Rack, turn on Helix Control. Helix Rack reads “Helix Control must be updated to work properly.” Press Knob 6 (OK).

New Amp Models in 2.90

Helix Floor, Helix Rack, Helix LT, Helix Native, HX Stomp

  • Revv Gen Purple, based on* the purple (Gain 1) channel of the Revv® Generator 120

New Cab Models in 2.90

Helix Floor, Helix Rack, Helix LT, Helix Native, HX Stomp

  • 1x12 Fullerton, based on* the classic 1958 Fender® 5C3 Tweed Deluxe
  • 1x12 Grammatico, based on* the modern 2016 Grammatico LaGrange

New Effects Models in 2.90

Helix Floor, Helix Rack, Helix LT, Helix Native, HX Effects, HX Stomp

  • Distortion > Alpaca Rouge (Mono, Stereo), inspired by* the Way Huge® Red Llama (modded)
  • Distortion > Legendary Drive (Mono, Stereo), based on* the Carvin VLD1 Legacy Drive (high gain channel)
  • Distortion > Xenomorph Fuzz (Mono, Stereo), inspired by* the Subdecay Harmonic Antagonizer
  • Dynamics > Rochester Comp (Mono, Stereo), based on* the Ashly® CLX-52 and created in conjunction with Billy Sheehan
  • Modulation> Pebble Phaser (Mono, Stereo), based on* the Electro-Harmonix® Small Stone phaser
  • Split > Dynamic, Line 6 original. This new Split block type lets you dynamically route signals to Path B, depending on how hard you play. For example, you could roll your guitar’s volume back a bit and play clean chords through a Grammatico on Path A and then roll it back up and dig in to blend in a searing Revv Gen Purple lead on Path B
    • Knob 1 (Threshold) — Signals below the Threshold are routed to Path A; signals above the Threshold are routed to Path B
    • Knob 2 (Attack) — Determines how fast the signal routes to Path B once reaching the Threshold
    • Knob 3 (Decay) — Determines how fast the signal returns to Path A once falling below the Threshold
    • Knob 4 (Reverse) — Swaps dynamic path routing. When set to “On”, signals below the Threshold are routed to Path B and signals above the Threshold are routed to Path A

NOTE: All product names used in this document are trademarks of their respective owners and neither Yamaha Guitar Group nor Line 6 are associated or affiliated with them. These trademarks appear solely to identify products whose tones and sounds were studied by Line 6 during sound model development.

New Features in Helix/HX Firmware 2.90

Output Meters

Helix Floor, Helix Rack / Control, Helix LT

The following block types display output meters in the inspector when selected:

  • Output
  • Send/Return > Send
  • Send/Return > FX Loop

IMPORTANT! Meters (in any product, not just Helix) are never appropriate for ensuring consistent levels from preset to preset. The models you use, the preset's frequency and dynamic response, your guitar or bass, your pickups, your playback system, your environment, your location in front of (or behind!) your playback system, and especially your bandmates all radically affect the perceived loudness of various presets. It's very common for the meters of one preset to show it's louder than another, while what you hear is the exact opposite. ALWAYS trust your ears when leveling presets, and whenever possible, level presets at stage volume, with the rest of the band playing.

Gain Reduction Meters

Helix Floor, Helix Rack / Control, Helix LT

The following block types display a gain reduction meter in the inspector when selected:

  • Dynamics > Compressor (the 3-Band Comp displays three meters)
  • Dynamics > Gate

Signal Present/Clip Indicators

Helix Floor, Helix Rack / Control, Helix LT, HX Stomp

The following block types now display a pale green background when signal is present and a bright red background if the block clips:

  • Input
  • Output
  • Send/Return > Send (clip indication only)
  • Send/Return > Return (clip indication only)
  • Send/Return > FX Loop (clip indication only)

Improved IR Referencing

Helix Floor, Helix Rack / Control, Helix LT, Helix Native, HX Effects, HX Stomp

Impulse Response blocks now reference each IR file by waveform instead of index number. This means that when presets are shared and the recipient has the same IRs, they'll appear in the right place without having to manually reorder all IRs to match.

IMPORTANT! For improved IR referencing to take place, all presets must be rebuilt. Presets should've automatically been rebuilt after updating to 2.90, but if they didn't, you can manually rebuild them:

  • Helix, Helix LT: While holding FS10 and FS11 (bottom row), turn on Helix. Wait for "Will rebuild all Presets..." to appear and let go
  • Helix Rack: While holding Knobs 1 and 3 below the screen, turn on Helix Rack. Wait for "Will rebuild all Presets..." to appear and let go
  • HX Effects: No preset rebuild necessary
  • HX Stomp: While holding both the Upper and Lower Knobs, turn on HX Stomp. Wait for "Will rebuild Presets..." to appear and let go
  • Helix Native: The first time you open the plug-in, a dialog appears, reading "Your presets are being parsed to associate IR blocks intelligently with the IRs they reference." Click OK.

Command Center > HX Preset

Helix Floor, Helix Rack / Control, Helix LT, HX Effects

A new Command Center command type lets you assign any preset (or Next Preset or Previous Preset) to any stomp switch. Together with HX Snapshot and HX Looper commands, you can now customize Stomp footswitch mode to your liking.

  1. From the Command Center, select a stomp switch and turn Knob 1 (Command) to select "HX Preset."
  2. Turn Knob 2 (Preset) to choose Next Preset, Previous Preset, or any single preset within the current setlist.

IMPORTANT! Although stomp mode switches can be assigned to multiple functions, to avoid unintended behavior, we strongly recommend HX Preset commands be assigned to empty footswitches.

Command Center > HX Snapshot

Helix Floor, Helix Rack / Control, Helix LT, HX Effects

A new Command Center command type lets you assign any snapshot (or Snapshot Up or Snapshot Down) to any stomp switch. Together with HX Preset and HX Looper commands, you can now customize Stomp footswitch mode to your liking.

  1. From the Command Center, select a stomp switch and turn Knob 1 (Command) to select "HX Snapshot."
  2. Turn Knob 2 (Behavior) to set the behavior of the stomp switch:
  • Press / Release — Pressing the switch engages the Knob 3 (Press) function; releasing the switch engages the Knob 4 (Release) function.
  • Press / Hold — Briefly pressing the switch engages the Knob 3 (Press) function; pressing and holding the switch for 1 second engages the Knob 4 (Hold) function

IMPORTANT! Although stomp mode switches can be assigned to multiple functions, to avoid unintended behavior, we strongly recommend HX Snapshot commands be assigned to empty footswitches.

Command Center > HX Looper

Helix Floor, Helix Rack / Control, Helix LT, HX Effects

A new Command Center command type lets you assign any Looper function to any stomp mode switch or instant command. Together with HX Preset and HX Looper commands, you can now customize Stomp footswitch mode to your liking. Note that a 6 Switch Looper or 1 Switch Looper block must be present in your preset for HX Looper commands to function properly. Also, caution should be taken when assigning HX Looper commands, as only the Press function is displayed on the scribble strip (Performance View on Helix LT); Release and Hold functions are not displayed.

  1. From the Command Center, select a stomp switch and turn Knob 1 (Command) to select "HX Looper."
  2. Turn Knob 2 (Behavior) to set the behavior of the stomp switch:
  • Press / Release — Pressing the switch engages the Knob 3 (Press) function; releasing the switch engages the Knob 4 (Release) function.
  • Press / Hold—Briefly pressing the switch engages the Knob 3 (Press) function; pressing and holding the switch for 1 second engages the Knob 4 (Hold) function.

IMPORTANT! Although stomp mode switches can be assigned to multiple functions, to avoid unintended behavior, we strongly recommend HX Looper commands be assigned to empty footswitches.

Shortcut > Model Subcategory

Helix Floor, Helix Rack / Control, Helix LT, HX Effects, HX Stomp

You can now quickly skip through model subcategories without ever having to open the model list. Finding a specific amp or effect is now faster than ever.

  • Helix / Helix Rack / Helix LT — From the Home screen, hold < PAGE and press PAGE > to jump to the the next subcategory. Hold PAGE < and press > PAGE to jump to the previous subcategory. Then turn the joystick to select models within that subcategory
  • HX Effects — From Stomp view, press and turn the Big Knob to skip subcategories, then turn normally to select models within that subcategory
  • HX Stomp — From Edit view, press and turnthe Lower Knob to skip subcategories, then turn normally to select models within that subcategory

For example, if you have HX Stomp and have selected an empty block location, pressing and turning the Lower Knob will jump to the first model in each subcategory: Distortion > Mono, Distortion > Stereo, Distortion > Legacy, Dynamics > Mono, Dynamics > Stereo, Dynamics > Legacy, EQ > Mono, EQ > Stereo, Modulation > Mono, Modulation > Stereo, and so on.

Update Firmware From HX Edit

Helix Floor, Helix Rack / Control, Helix LT, HX Effects, HX Stomp

Instead of hanging out on social media, desperately asking when the next firmware’s dropping, you can now, I dunno, actually play guitar? As soon as a new update becomes available, HX Editwill tell you, and all you gotta do is follow the prompts.

New Features in Helix Native1.90

NOTE: For additional information on Helix Native 1.90 or HX Edit 2.90, check out the latest Helix Native and HX Edit Pilot’s Guides, which are automatically installed with the new 1.90 / 2.90 software.

A/B Compare

Helix Native

A new set of buttons lets you temporarily store all of the Helix Native instance’s model selection and parameter settings, then tweak any number of parameters and easily compare an A version and a B version. Click the middle button to quickly copy the current state to the other (A to B or B to A).

Other Changes and Improvements in Helix / HX 2.90 | Helix Native 1.90

  • The EQ > Low / High Shelf model’s Hi Freq parameter now goes down to 400Hz (Helix Floor / Rack / LT, HX Effects, HX Stomp, Helix Native)
  • Booting up now takes roughly half the time (Helix Floor / Rack / LT, HX Effects)
  • While in Tuner mode, the three footswitch LEDs act as additional tuning indicators (HX Stomp [feature is already in HX Effects])
  • Edited presets now display a small “E” icon (HX Effects, HX Stomp [feature is already in Helix Floor / Rack / LT])
  • Blocks can now quickly be copied and pasted across signal flows by Option-dragging (Windows: Control-dragging) the block (Helix Native, HX Edit)
  • IRs can now be dragged directly from the Impulses list onto the signal flow view (Helix Native, HX Edit)
  • Double-clicking an IR in the Impulses list now auto-populates the currently selected IR block (Helix Native, HX Edit)
  • Parameters with very few values now appear as select boxes instead of sliders (Helix Native, HX Edit)
  • Parameters assigned to controllers now scale slider width to reflect Min and Max values (Helix Native)
  • A “Check for Updates” box has been added to the Preferences window (Helix Native, HX Edit)
  • Lots of stability and usability improvements across the board (Helix Native, HX Edit)

Bug Fixes in 2.90

  • Distortion > Obsidian Drive’s polarity was reversed
  • Remotely changing Powercab Plus speaker modes upon preset recall could sometimes result in a volume bump
  • Using Learn to quickly assign a parameter to footswitch control could occasionally swap the switch’s Latching / Momentary setting
  • Setting the Input block on Path 1A to S/PDIF could stop passing audio if a new Path 1B Input block had been created
  • Connecting an expression pedal to Helix Control could sometimes cause the pedal position display to behave erratically
  • Lots of other minor bug fixes

Known Issues in 2.90

  • A slight thump can be heard when loading a Distortion > Kinky Boost, Arbitrator Fuzz, or Tycoctavia Fuzz model
  • While backing up, the scribble strip on FS8 can sometimes flicker (Helix Floor, Helix Rack / Control)
  • In very rare cases, leaving the unit on for many hours can sometimes cause reverb models to cease outputting audio
  • In a preset with two IRs blocks, moving one IR block to Path B can sometimes cause the other IR block to reset its Impulse Response to slot 1
  • In rare cases, after exporting and then importing presets using HX Edit, the Split block’s bypass state can sometimes change (Helix Floor, Helix RackControl, Helix LT)/
  • When using Blue Cat Audio’s PatchWork VST host software, resizing the Helix Native window may not scale smoothly (Helix Native)

Compatible OS: Mac OS X, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra, macOS Mojave
( 45 MB )

Get Download




Helix Native      
Helix Native
Version 1.90
Released 4/21/20

Works with:
No Hardware Required

Helix / HX 2.90 | Helix Native 1.90

“The Always Level Presets By Ear at Stage Volume with the Rest of the Band Playing Update”

Helix / HX 2.90 and Helix Native 1.90 include new amps, cabs, effects, features, and bug fixes, and is strongly recommended for all Helix and HX owners.

Updating to 2.90

Helix Floor, Helix Rack, Helix LT, HX Effects, HX Stomp

STEP 1 — Updating HX Edit to 2.90

1. Log onto line6.com, download, and install HX Edit 2.90:

  • Mac OS X: link
  • Windows 7/8/10: link

STEP 2 — Updating Helix / HX Firmware to 2.90

  1. If you have Helix Rack/Control, turn off Helix Control. Also, shut down all Line 6 software or any programs that use audio, like DAWs, iTunes, Spotify, video games, etc.
  2. Connect your Helix/HX device to a Mac or PC via USB (do not use any sort of USB hub, which may include the front USB ports on towers) and turn it on.
  3. Launch the new version of HX Edit 2.90 you installed in Step 1 above. If you’re not signed in, click “Check for Updates” in the lower right corner and sign in. If you’re already signed in, a dialog panel appears, indicating an update is available.
  4. Click “Update Now.” A window appears, asking you to back up your Helix/HX hardware. Click OK, optionally rename the backup and / or choose a different destination folder, and then click “Create Backup.”
  5. Continue following the prompts. Once updated, the window reads “Update Complete” and your Helix / HX hardware begins rebuilding its presets; wait for this to complete and click “Back to HX Edit.”
  6. If you have Helix Control connected to Helix Rack, turn on Helix Control. Helix Rack reads “Helix Control must be updated to work properly.” Press Knob 6 (OK).

New Amp Models in 2.90

Helix Floor, Helix Rack, Helix LT, Helix Native, HX Stomp

  • Revv Gen Purple, based on* the purple (Gain 1) channel of the Revv® Generator 120

New Cab Models in 2.90

Helix Floor, Helix Rack, Helix LT, Helix Native, HX Stomp

  • 1x12 Fullerton, based on* the classic 1958 Fender® 5C3 Tweed Deluxe
  • 1x12 Grammatico, based on* the modern 2016 Grammatico LaGrange

New Effects Models in 2.90

Helix Floor, Helix Rack, Helix LT, Helix Native, HX Effects, HX Stomp

  • Distortion > Alpaca Rouge (Mono, Stereo), inspired by* the Way Huge® Red Llama (modded)
  • Distortion > Legendary Drive (Mono, Stereo), based on* the Carvin VLD1 Legacy Drive (high gain channel)
  • Distortion > Xenomorph Fuzz (Mono, Stereo), inspired by* the Subdecay Harmonic Antagonizer
  • Dynamics > Rochester Comp (Mono, Stereo), based on* the Ashly® CLX-52 and created in conjunction with Billy Sheehan
  • Modulation> Pebble Phaser (Mono, Stereo), based on* the Electro-Harmonix® Small Stone phaser
  • Split > Dynamic, Line 6 original. This new Split block type lets you dynamically route signals to Path B, depending on how hard you play. For example, you could roll your guitar’s volume back a bit and play clean chords through a Grammatico on Path A and then roll it back up and dig in to blend in a searing Revv Gen Purple lead on Path B
    • Knob 1 (Threshold) — Signals below the Threshold are routed to Path A; signals above the Threshold are routed to Path B
    • Knob 2 (Attack) — Determines how fast the signal routes to Path B once reaching the Threshold
    • Knob 3 (Decay) — Determines how fast the signal returns to Path A once falling below the Threshold
    • Knob 4 (Reverse) — Swaps dynamic path routing. When set to “On”, signals below the Threshold are routed to Path B and signals above the Threshold are routed to Path A

NOTE: All product names used in this document are trademarks of their respective owners and neither Yamaha Guitar Group nor Line 6 are associated or affiliated with them. These trademarks appear solely to identify products whose tones and sounds were studied by Line 6 during sound model development.

New Features in Helix/HX Firmware 2.90

Output Meters

Helix Floor, Helix Rack / Control, Helix LT

The following block types display output meters in the inspector when selected:

  • Output
  • Send/Return > Send
  • Send/Return > FX Loop

IMPORTANT! Meters (in any product, not just Helix) are never appropriate for ensuring consistent levels from preset to preset. The models you use, the preset's frequency and dynamic response, your guitar or bass, your pickups, your playback system, your environment, your location in front of (or behind!) your playback system, and especially your bandmates all radically affect the perceived loudness of various presets. It's very common for the meters of one preset to show it's louder than another, while what you hear is the exact opposite. ALWAYS trust your ears when leveling presets, and whenever possible, level presets at stage volume, with the rest of the band playing.

Gain Reduction Meters

Helix Floor, Helix Rack / Control, Helix LT

The following block types display a gain reduction meter in the inspector when selected:

  • Dynamics > Compressor (the 3-Band Comp displays three meters)
  • Dynamics > Gate

Signal Present/Clip Indicators

Helix Floor, Helix Rack / Control, Helix LT, HX Stomp

The following block types now display a pale green background when signal is present and a bright red background if the block clips:

  • Input
  • Output
  • Send/Return > Send (clip indication only)
  • Send/Return > Return (clip indication only)
  • Send/Return > FX Loop (clip indication only)

Improved IR Referencing

Helix Floor, Helix Rack / Control, Helix LT, Helix Native, HX Effects, HX Stomp

Impulse Response blocks now reference each IR file by waveform instead of index number. This means that when presets are shared and the recipient has the same IRs, they'll appear in the right place without having to manually reorder all IRs to match.

IMPORTANT! For improved IR referencing to take place, all presets must be rebuilt. Presets should've automatically been rebuilt after updating to 2.90, but if they didn't, you can manually rebuild them:

  • Helix, Helix LT: While holding FS10 and FS11 (bottom row), turn on Helix. Wait for "Will rebuild all Presets..." to appear and let go
  • Helix Rack: While holding Knobs 1 and 3 below the screen, turn on Helix Rack. Wait for "Will rebuild all Presets..." to appear and let go
  • HX Effects: No preset rebuild necessary
  • HX Stomp: While holding both the Upper and Lower Knobs, turn on HX Stomp. Wait for "Will rebuild Presets..." to appear and let go
  • Helix Native: The first time you open the plug-in, a dialog appears, reading "Your presets are being parsed to associate IR blocks intelligently with the IRs they reference." Click OK.

Command Center > HX Preset

Helix Floor, Helix Rack / Control, Helix LT, HX Effects

A new Command Center command type lets you assign any preset (or Next Preset or Previous Preset) to any stomp switch. Together with HX Snapshot and HX Looper commands, you can now customize Stomp footswitch mode to your liking.

  1. From the Command Center, select a stomp switch and turn Knob 1 (Command) to select "HX Preset."
  2. Turn Knob 2 (Preset) to choose Next Preset, Previous Preset, or any single preset within the current setlist.

IMPORTANT! Although stomp mode switches can be assigned to multiple functions, to avoid unintended behavior, we strongly recommend HX Preset commands be assigned to empty footswitches.

Command Center > HX Snapshot

Helix Floor, Helix Rack / Control, Helix LT, HX Effects

A new Command Center command type lets you assign any snapshot (or Snapshot Up or Snapshot Down) to any stomp switch. Together with HX Preset and HX Looper commands, you can now customize Stomp footswitch mode to your liking.

  1. From the Command Center, select a stomp switch and turn Knob 1 (Command) to select "HX Snapshot."
  2. Turn Knob 2 (Behavior) to set the behavior of the stomp switch:
  • Press / Release — Pressing the switch engages the Knob 3 (Press) function; releasing the switch engages the Knob 4 (Release) function.
  • Press / Hold — Briefly pressing the switch engages the Knob 3 (Press) function; pressing and holding the switch for 1 second engages the Knob 4 (Hold) function

IMPORTANT! Although stomp mode switches can be assigned to multiple functions, to avoid unintended behavior, we strongly recommend HX Snapshot commands be assigned to empty footswitches.

Command Center > HX Looper

Helix Floor, Helix Rack / Control, Helix LT, HX Effects

A new Command Center command type lets you assign any Looper function to any stomp mode switch or instant command. Together with HX Preset and HX Looper commands, you can now customize Stomp footswitch mode to your liking. Note that a 6 Switch Looper or 1 Switch Looper block must be present in your preset for HX Looper commands to function properly. Also, caution should be taken when assigning HX Looper commands, as only the Press function is displayed on the scribble strip (Performance View on Helix LT); Release and Hold functions are not displayed.

  1. From the Command Center, select a stomp switch and turn Knob 1 (Command) to select "HX Looper."
  2. Turn Knob 2 (Behavior) to set the behavior of the stomp switch:
  • Press / Release — Pressing the switch engages the Knob 3 (Press) function; releasing the switch engages the Knob 4 (Release) function.
  • Press / Hold—Briefly pressing the switch engages the Knob 3 (Press) function; pressing and holding the switch for 1 second engages the Knob 4 (Hold) function.

IMPORTANT! Although stomp mode switches can be assigned to multiple functions, to avoid unintended behavior, we strongly recommend HX Looper commands be assigned to empty footswitches.

Shortcut > Model Subcategory

Helix Floor, Helix Rack / Control, Helix LT, HX Effects, HX Stomp

You can now quickly skip through model subcategories without ever having to open the model list. Finding a specific amp or effect is now faster than ever.

  • Helix / Helix Rack / Helix LT — From the Home screen, hold to jump to the the next subcategory. Hold PAGE> and press
  • HX Effects — From Stomp view, press and turn the Big Knob to skip subcategories, then turn normally to select models within that subcategory
  • HX Stomp — From Edit view, press and turnthe Lower Knob to skip subcategories, then turn normally to select models within that subcategory

For example, if you have HX Stomp and have selected an empty block location, pressing and turning the Lower Knob will jump to the first model in each subcategory: Distortion > Mono, Distortion > Stereo, Distortion > Legacy, Dynamics > Mono, Dynamics > Stereo, Dynamics > Legacy, EQ > Mono, EQ > Stereo, Modulation > Mono, Modulation > Stereo, and so on.

Update Firmware From HX Edit

Helix Floor, Helix Rack / Control, Helix LT, HX Effects, HX Stomp

Instead of hanging out on social media, desperately asking when the next firmware’s dropping, you can now, I dunno, actually play guitar? As soon as a new update becomes available, HX Editwill tell you, and all you gotta do is follow the prompts.

New Features in Helix Native1.90

NOTE: For additional information on Helix Native 1.90 or HX Edit 2.90, check out the latest Helix Native and HX Edit Pilot’s Guides, which are automatically installed with the new 1.90 / 2.90 software.

A/B Compare

Helix Native

A new set of buttons lets you temporarily store all of the Helix Native instance’s model selection and parameter settings, then tweak any number of parameters and easily compare an A version and a B version. Click the middle button to quickly copy the current state to the other (A to B or B to A).

Other Changes and Improvements in Helix / HX 2.90 | Helix Native 1.90

  • The EQ > Low / High Shelf model’s Hi Freq parameter now goes down to 400Hz (Helix Floor / Rack / LT, HX Effects, HX Stomp, Helix Native)
  • Booting up now takes roughly half the time (Helix Floor / Rack / LT, HX Effects)
  • While in Tuner mode, the three footswitch LEDs act as additional tuning indicators (HX Stomp [feature is already in HX Effects])
  • Edited presets now display a small “E” icon (HX Effects, HX Stomp [feature is already in Helix Floor / Rack / LT])
  • Blocks can now quickly be copied and pasted across signal flows by Option-dragging (Windows: Control-dragging) the block (Helix Native, HX Edit)
  • IRs can now be dragged directly from the Impulses list onto the signal flow view (Helix Native, HX Edit)
  • Double-clicking an IR in the Impulses list now auto-populates the currently selected IR block (Helix Native, HX Edit)
  • Parameters with very few values now appear as select boxes instead of sliders (Helix Native, HX Edit)
  • Parameters assigned to controllers now scale slider width to reflect Min and Max values (Helix Native)
  • A “Check for Updates” box has been added to the Preferences window (Helix Native, HX Edit)
  • Lots of stability and usability improvements across the board (Helix Native, HX Edit)

Bug Fixes in 2.90

  • Distortion > Obsidian Drive’s polarity was reversed
  • Remotely changing Powercab Plus speaker modes upon preset recall could sometimes result in a volume bump
  • Using Learn to quickly assign a parameter to footswitch control could occasionally swap the switch’s Latching / Momentary setting
  • Setting the Input block on Path 1A to S/PDIF could stop passing audio if a new Path 1B Input block had been created
  • Connecting an expression pedal to Helix Control could sometimes cause the pedal position display to behave erratically
  • Lots of other minor bug fixes

Known Issues in 2.90

  • A slight thump can be heard when loading a Distortion > Kinky Boost, Arbitrator Fuzz, or Tycoctavia Fuzz model
  • While backing up, the scribble strip on FS8 can sometimes flicker (Helix Floor, Helix Rack / Control)
  • In very rare cases, leaving the unit on for many hours can sometimes cause reverb models to cease outputting audio
  • In a preset with two IRs blocks, moving one IR block to Path B can sometimes cause the other IR block to reset its Impulse Response to slot 1
  • In rare cases, after exporting and then importing presets using HX Edit, the Split block’s bypass state can sometimes change (Helix Floor, Helix RackControl, Helix LT)/
  • When using Blue Cat Audio’s PatchWork VST host software, resizing the Helix Native window may not scale smoothly (Helix Native)

Compatible OS: Windows 7, Windows 8, Windows 10
( 36 MB )

Get Download




Helix Native      
Helix Native
Version 1.82
Released 9/26/19

Works with:
No Hardware Required

Helix Native 1.82 Release Notes

Bug Fixes

  • In some cases, an error message would appear when clicking redo after deleting a block
  • After cutting or clearing a block, its bypass/controller assignments could be lost
  • Stepping through presets in order could be redone reliably, but not undone
  • When changing models, clicking Undo could inadvertently clear automation assignments of common parameters
  • Helix Native could not instantiate in hardened runtime builds of Cubase 10.5
  • When in Hardware Compatibility Mode for HX Stomp, a direct (dry) signal could be heard
  • Undo/Redo was limited to 31 steps
  • In rare cases, clicking Undo or Redo could change a Cab > Dual block into a Cab > Single block
  • Other minor bug fixes

    Compatible OS: Windows 7, Windows 8, Windows 10
    ( 30 MB )

    Get Download




Helix Native      
Helix Native
Version 1.82
Released 9/26/19

Works with:
No Hardware Required

Helix Native 1.82 Release Notes

Bug Fixes

  • In some cases, an error message would appear when clicking redo after deleting a block
  • After cutting or clearing a block, its bypass/controller assignments could be lost
  • Stepping through presets in order could be redone reliably, but not undone
  • When changing models, clicking Undo could inadvertently clear automation assignments of common parameters
  • Helix Native could not instantiate in hardened runtime builds of Cubase 10.5
  • When in Hardware Compatibility Mode for HX Stomp, a direct (dry) signal could be heard
  • Undo/Redo was limited to 31 steps
  • In rare cases, clicking Undo or Redo could change a Cab > Dual block into a Cab > Single block
  • Other minor bug fixes

    Compatible OS: Mac OS X, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra, macOS Mojave, macOS Catalina
    ( 39 MB )

    Get Download




Helix Native      
Helix Native
Version 1.81
Released 7/30/19

Works with:
No Hardware Required

Helix Native 1.81 Release Notes

Bug Fixes in 1.81

  • After loading two presets in a row containing a Looper block on Path 1B or 2B, audio could sometimes drop out

  • Changing IRs via controller or snapshot could sometimes result in an audible crossfade between IRs

  • Performing an Undo/Redo function could sometimes cause a Cab > Dual block to change to a Cab > Single block

  • Performing an Undo/Redo function could sometimes cause a stereo effect block to change to a mono effect block

  • On Windows, the Win Defender pop-up could block installation of Helix Native or HX Edit

Known Issues in 1.81

  • Pitch/Synth > 3 OSC Synth, 3 Note Generator, and 4 OSC Generator are louder than in 2.71

  • In rare cases, the Dynamics > LA Studio Comp model can sometimes cause a drop in preset volume

  • Helix Native will not open in hardened runtime builds of Cubase 10.5

  • Logic Pro X is currently unable to write snapshot or switch automation data for Helix Native

  • Performing an undo after a block cut or clear can delete the block’s footswitch and/or controller assignments

  • Moving an effect, amp, cab, or IR block can sometimes inadvertently reposition a Split or Merge block

  • Changing models can clear automation assignments of common parameters (such as Amp > Bass orDelay > Time)

Compatible OS: Mac OS X, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra, macOS Mojave
( 39 MB )

Get Download




Helix Native      
Helix Native
Version 1.81
Released 7/29/19

Works with:
No Hardware Required

Helix Native 1.81 Release Notes

Bug Fixes in 1.81

  • After loading two presets in a row containing a Looper block on Path 1B or 2B, audio could sometimes drop out

  • Changing IRs via controller or snapshot could sometimes result in an audible crossfade between IRs

  • Performing an Undo/Redo function could sometimes cause a Cab > Dual block to change to a Cab > Single block

  • Performing an Undo/Redo function could sometimes cause a stereo effect block to change to a mono effect block

  • On Windows, the Win Defender pop-up could block installation of Helix Native or HX Edit

Known Issues in 1.81

  • Pitch/Synth > 3 OSC Synth, 3 Note Generator, and 4 OSC Generator are louder than in 2.71

  • In rare cases, the Dynamics > LA Studio Comp model can sometimes cause a drop in preset volume

  • Helix Native will not open in hardened runtime builds of Cubase 10.5

  • Logic Pro X is currently unable to write snapshot or switch automation data for Helix Native

  • Performing an undo after a block cut or clear can delete the block’s footswitch and/or controller assignments

  • Moving an effect, amp, cab, or IR block can sometimes inadvertently reposition a Split or Merge block

  • Changing models can clear automation assignments of common parameters (such as Amp > Bass orDelay > Time)

Compatible OS: Windows 7, Windows 8, Windows 10
( 30 MB )

Get Download




Helix Native      
Helix Native
Version 1.80
Released 7/18/19

Works with:
No Hardware Required

NATIVE 1.80

IMPORTANT! 1.80 utilizes the new Helix Core engine, which unifies all Helix and HX products into the same ecosystem. Because there are tons of changes under the hood, presets created in 1.80 will not be compatible with earlier firmware, which means if you want to return to 1.71 for whatever reason, and you didn’t back up before updating to 1.80, your presets will NO LONGER WORK. Therefore, we STRONGLY RECOMMEND everyone back up everything BEFORE updating.

Instructions for backing up begin… now.

Updating to 1.80 (READ ME!)

1. Backing Up Helix Native.

  1. Open any instance of YOUR CURRENT VERSION Helix Native (NOT the new Helix Native 1.80) within your DAW and click the gear icon in the lower left corner to open the Preferences window.
  2. From the Presets/IRs tab, click “Export Bundle.”
  3. Choose the destination folder and click “Save.”

TIP: If you want to load the 1.80 factory presets, it’s better to manually back up individual setlists, so you can later import them into empty setlists. To do this, from the preset library along the left side, select the setlist you want to back up and click the small yellow “Export.” Choose a destination folder and click “Save.” Repeat for any other setlists you want to back up.

2. Loading the 1.80 Factory Presets / Templates

IMPORTANT! The following procedure will COMPLETELY ERASE ALL OF YOUR CUSTOM PRESETS! If you want to keep them, make sure you back them up First! (See “STEP 1: Backing Up Helix Native” above.)

  1. Open any instance of Helix Nativewithin your DAW and click the gear icon in the lower left corner to open the Preferences window.
  2. From the Presets/IRs tab, click “Restore Factory Setlists”

3. Restoring Helix Native from a Backup

  1. Open any instance of Helix Native within your DAW and click the gear icon in the lower left corner to open the Preferences window.
  2. From the Presets/IRs tab, click “Import Bundle.”
  3. Browse to the location chosen in STEP 1 above and click “Open.”

Whew! That wasn’t too terrible, now was it? What’s that… it was? Sorry. Now that Helix Core is finished, hopefully future update procedures will be less… involved.

New Amp Models in 1.80

Fullerton Nrm, based on* the classic 1958 Fender® 5C3 Tweed Deluxe (normal channel)

Fullerton Brt, based on* the classic 1958 Fender® 5C3 Tweed Deluxe (bright channel)

Fullerton Jump, based on* the classic 1958 Fender® 5C3 Tweed Deluxe (jumped channels)

Grammatico Nrm, based on* the modern 2016 Grammatico LaGrange (normal channel)

Grammatico Brt, based on* the modern 2016 Grammatico LaGrange (bright channel)

Grammatico Jump, based on* the modern 2016 Grammatico LaGrange (jumped channels)

Revv Gen Red, based on* the red (gain 2) channel of the Revv® Generator 120

Ampeg SVT-4 PRO, based on* the Ampeg® SVT-4 PRO

NOTE: All product names used in this document are trademarks of their respective owners and neither Yamaha Guitar Group nor Line 6 are associated or affiliated with them. These trademarks appear solely to identify products whose tones and sounds were studied by Line 6 during sound model development. That said, the teams at Revv and Grammatico are super cool (and patient!) and you should buy their awesome amps.

New Effects Models in 1.80

Distortion > Dhyana Drive (Mono, Stereo), based on* the Hermida Zendrive

Distortion > Heir Apparent (Mono, Stereo), based on* the Analogman Prince of Tone (basically half a King of Tone)

Distortion > Tone Sovereign (Mono, Stereo), based on* the Analogman King of Tone V4 (basically two Prince of Tones in one)

Distortion > ZeroAmp Bass DI (Mono, Stereo), based on* the Tech 21® SansAmp Bass Driver DI V1

Distortion > Ampeg Scrambler (Mono, Stereo), based on* the Ampeg® Scrambler Bass Overdrive

Filter > Asheville Pattrn (Mono, Stereo), based on* the Moog® Moogerfooger® MF-105M MIDI MuRF Filter (with both MuRF and Bass MuRF voicings)

EQ > Low/High Shelf (Mono, Stereo), Line 6 Original

EQ > Tilt (Mono, Stereo), Line 6 Original. Tilt is a subtle 6dB EQ that boosts high frequencies while simultaneously attenuating low frequencies (or vice versa). Great for quickly making tones a bit brighter or darker. The Center Freq parameter sets the frequency around which the boost and cut pivot

NOTE: All product names used in this document are trademarks of their respective owners and neither Yamaha Guitar Group nor Line 6 are associated or affiliated with them. These trademarks appear solely to identify products whose tones and sounds were studied by Line 6 during sound model development.

New Features in 1.80

NOTE: For additional information on Helix Native 1.80, check out the latest Helix Native Pilot’s Guides, which is automatically installed with the new 1.80 software.

Snapshot Bypass

There may be situations where you don’t want Helix’s snapshots to control a particular block’s bypass state; that is, you’d prefer to turn it on and off manually. For example, you may want manual control of a boost pedal at any time without worrying whether a particular snapshot might turn it on or off.

Right-click (Mac: control-click) on a processing block and uncheck “Snapshot Bypass.” Alternatively, right-click (Mac: control-click) the Bypass button to uncheck “Snapshot Bypass.”

Hardware Compatibility Mode

Helix Native can now reflect the signal flow and model set of all Helix and HX hardware devices, so transferring presets to and from your DAW is even easier. In addition, Hardware Compatibility can be disabled entirely, so the simultaneous model count is now limited only by the speed of your computer.

  1. Open any instance of Helix Native within your DAW and click the gear icon in the lower left corner to open the Preferences window.
  2. Click the Hardware Compatibility tab.
  3. From the “Current Hardware Compatibility Mode” pull-down menu, select one of the following options:

Off

Disables Hardware Compatibility and lets you add as many blocks (of any type) as your computer’s horsepower will allow. Choose this setting if you don’t own any Helix or HX hardware

Helix Floor /LT / Rack (the default)

Configures Helix Native such that any presets made can be easily loaded into Helix Floor, Helix Rack/Control, or Helix LT

HX Effects

Configures Helix Native such that any presets made can be easily loaded into HX Effects. In this mode, no Amp or Cab models will be available

HX Stomp

Configures Helix Native such that any presets made can be easily loaded into HX Stomp

  1. Click OK. Depending on the current Hardware Compatibility Mode, Helix Native may repopulate the preset list to reflect that of the selected hardware. For example, if you choose “HX Stomp,” HX Stomp’s factory presets will appear and the signal flow will be limited to six blocks
  2. Click “Set as Default” to ensure any new instances of Helix Native open in the selected mode.

IMPORTANT! Each Hardware Compatibility Mode incorporates its own, independent preset library. Therefore, you will see the Helix Native preset library automatically repopulate to reflect that of the selected hardware.

Helix / HX Preset Sharing

All Helix and HX hardware and software now live within the same ecosystem. Using multiple instances of Helix Native, both blocks and entire presets can be freely dragged and dropped or copied and pasted between units. Aside from the obvious caveats below, all Helix and HX products can now share the same content.

IMPORTANT! Due to the vast differences in how Helix/HX products manage controllers, snapshots, and Command Center messages, there is no guarantee that every single tiny detail of a preset will translate properly.

You can now drag / drop, copy / paste, or otherwise load:

HX Effects or HX Stomp presets into Helix Floor / Rack / LT and Helix Native. If an HX Effects preset has 9 blocks, the ninth block will be routed to Path 2

Helix Floor / Rack / LT, Helix Native, or HX Stomp presets into HX Effects. However, there are caveats.

To avoid an error message, the source preset must:

  • Contain 9 or fewer blocks
  • Not contain any Amp+Cab, Amp, Preamp, or Cab blocks
  • Contain no more than one Split and Merge block
  • Fit within one path worth of DSP processing

Helix Floor / Rack/LT, Helix Native, or HX Effects presets into HX Stomp. However, there are caveats. To avoid an error message, the source preset must:

  • Contain 6 or fewer blocks
  • Contain no more than one Split and Merge block Fit within one path worth of DSP processing

Helix Floor / Rack/LT, HX Effects, or HX Stomp presets into Helix Native

NOTE: A dialog box will appear if the source preset cannot be accommodated by the current Hardware Compatibility Mode (see above). At this point, you may choose to switch the current Hardware Compatibility Mode to that of the source preset, or attempt to translate the preset into the current Hardware Compatibility Mode, given the caveats above. See the Helix Native Pilot’s Guide for more information. Click the question mark icon in the lower left corner of the plug-in.

Undo/Redo

Helix Native now supports multiple levels of undo/redo.

  1. Click the Undo button to undo the most recent edit.
  2. Click the Redo button to redo the most recent undo.

MIDI Learn

Helix Native can now learn an incoming MIDI CC message and automatically assign it to a parameter.

  1. Right-click on a parameter and select Controller > MIDI Learn. A small brain icon flashes. If you change your mind, click the icon to cancel.
  2. Send Helix Native a MIDI CC message. The parameter is automatically assigned to it.

TIP: In Helix Native, right-click (Mac: control-click) on a processing block to open a pull-down that lets you manually assign a MIDI CC to block bypass. Right-click (Mac: control-click) on a parameter slider to open a pull-down menu that lets you manually assign a MIDI CC to parameter control.

NOTE: Not all DAW software automatically routes incoming MIDI data through to any plug-in, especially those instantiated as an insert on an audio track. See your DAW’s documentation for more information. The new MIDI In indicator in the lower right corner flashes if Helix Native receives MIDI data.

Other Changes and Improvements in 1.80

On a Cab > Dual block, changing the first cab no longer changes the second cab.

Impulse Response blocks now display as many IR file name characters as will fit in the inspector header

Additional values have been added to recall snapshots remotely via MIDI CC69 Value 8 will select the next snapshot and Value 9 will select the previous snapshot

A small indicator in the lower right corner of the plug-in window flashes whenever a MIDI message is received

Automation and MIDIcontroller assignments can now be managed together from the AutomationController Assign tab

Blocks assigned to controllers or automation now display their category name in brackets. Parameters assigned to controllers or automation display a small icon to the left of their parameter sliders. In addition, pop-up menus now display controller or automation assignments, if any

From the Automation/Controller Assign tab, right-click (Mac: control-click) an assignment to open a pull-down menu, letting you clear one or all assignments

A new “Restore Factory Settings” button has been added to the bottom of the Preferences window

Wow, you’re still reading this? Congratulations; you’re way cooler and better looking than other Helix/HX owners. Celebrate your superiority with some delicious tacos.

As Ampeg is now Line 6’s sister company, all pre-1.80 Ampeg models have been renamed:

Amp > Bass > Tuck n’ Go is now called “Ampeg B-15NF

Amp > Bass > SV Beast Nrm is now called “Ampeg SVT Nrm

Amp > Bass > SV Beast Brt is now called “Ampeg SVT Brt

Cab > 1x15 Tuck n’ Go is now called “1x15 Ampeg B-15

Cab > 4x10 Rhino is now called “4x10 Ampeg HLF

Cab > 8x10 SV Beast is now called “8x10 Ampeg SVT E

Numerous stability and performance improvements Lots of other little things

Known Issues in 1.80

Downgrading to 1.71 or older will erase ALL preset data.

A preset may load blank after dragging a looper block across a split, merge and another block two times. Simply load the preset again and it will load as expected.

Undo/Redo does not work when switching between time and note divisions.

Save to Library lists presets in “01A-32D” setlist format regardless of preferences.

Compatible OS: Windows 7, Windows 8, Windows 10
( 30 MB )

Get Download




Helix Native      
Helix Native
Version 1.80
Released 7/18/19

Works with:
No Hardware Required

NATIVE 1.80

IMPORTANT! 1.80 utilizes the new Helix Core engine, which unifies all Helix and HX products into the same ecosystem. Because there are tons of changes under the hood, presets created in 1.80 will not be compatible with earlier firmware, which means if you want to return to 1.71 for whatever reason, and you didn’t back up before updating to 1.80, your presets will NO LONGER WORK. Therefore, we STRONGLY RECOMMEND everyone back up everything BEFORE updating.

Instructions for backing up begin… now.

Updating to 1.80 (READ ME!)

1. Backing Up Helix Native.

  1. Open any instance of YOUR CURRENT VERSION Helix Native (NOT the new Helix Native 1.80) within your DAW and click the gear icon in the lower left corner to open the Preferences window.
  2. From the Presets/IRs tab, click “Export Bundle.”
  3. Choose the destination folder and click “Save.”

TIP: If you want to load the 1.80 factory presets, it’s better to manually back up individual setlists, so you can later import them into empty setlists. To do this, from the preset library along the left side, select the setlist you want to back up and click the small yellow “Export.” Choose a destination folder and click “Save.” Repeat for any other setlists you want to back up.

2. Loading the 1.80 Factory Presets / Templates

IMPORTANT! The following procedure will COMPLETELY ERASE ALL OF YOUR CUSTOM PRESETS! If you want to keep them, make sure you back them up First! (See “STEP 1: Backing Up Helix Native” above.)

  1. Open any instance of Helix Nativewithin your DAW and click the gear icon in the lower left corner to open the Preferences window.
  2. From the Presets/IRs tab, click “Restore Factory Setlists”

3. Restoring Helix Native from a Backup

  1. Open any instance of Helix Native within your DAW and click the gear icon in the lower left corner to open the Preferences window.
  2. From the Presets/IRs tab, click “Import Bundle.”
  3. Browse to the location chosen in STEP 1 above and click “Open.”

Whew! That wasn’t too terrible, now was it? What’s that… it was? Sorry. Now that Helix Core is finished, hopefully future update procedures will be less… involved.

New Amp Models in 1.80

Fullerton Nrm, based on* the classic 1958 Fender® 5C3 Tweed Deluxe (normal channel)

Fullerton Brt, based on* the classic 1958 Fender® 5C3 Tweed Deluxe (bright channel)

Fullerton Jump, based on* the classic 1958 Fender® 5C3 Tweed Deluxe (jumped channels)

Grammatico Nrm, based on* the modern 2016 Grammatico LaGrange (normal channel)

Grammatico Brt, based on* the modern 2016 Grammatico LaGrange (bright channel)

Grammatico Jump, based on* the modern 2016 Grammatico LaGrange (jumped channels)

Revv Gen Red, based on* the red (gain 2) channel of the Revv® Generator 120

Ampeg SVT-4 PRO, based on* the Ampeg® SVT-4 PRO

NOTE: All product names used in this document are trademarks of their respective owners and neither Yamaha Guitar Group nor Line 6 are associated or affiliated with them. These trademarks appear solely to identify products whose tones and sounds were studied by Line 6 during sound model development. That said, the teams at Revv and Grammatico are super cool (and patient!) and you should buy their awesome amps.

New Effects Models in 1.80

Distortion > Dhyana Drive (Mono, Stereo), based on* the Hermida Zendrive

Distortion > Heir Apparent (Mono, Stereo), based on* the Analogman Prince of Tone (basically half a King of Tone)

Distortion > Tone Sovereign (Mono, Stereo), based on* the Analogman King of Tone V4 (basically two Prince of Tones in one)

Distortion > ZeroAmp Bass DI (Mono, Stereo), based on* the Tech 21® SansAmp Bass Driver DI V1

Distortion > Ampeg Scrambler (Mono, Stereo), based on* the Ampeg® Scrambler Bass Overdrive

Filter > Asheville Pattrn (Mono, Stereo), based on* the Moog® Moogerfooger® MF-105M MIDI MuRF Filter (with both MuRF and Bass MuRF voicings)

EQ > Low/High Shelf (Mono, Stereo), Line 6 Original

EQ > Tilt (Mono, Stereo), Line 6 Original. Tilt is a subtle 6dB EQ that boosts high frequencies while simultaneously attenuating low frequencies (or vice versa). Great for quickly making tones a bit brighter or darker. The Center Freq parameter sets the frequency around which the boost and cut pivot

NOTE: All product names used in this document are trademarks of their respective owners and neither Yamaha Guitar Group nor Line 6 are associated or affiliated with them. These trademarks appear solely to identify products whose tones and sounds were studied by Line 6 during sound model development.

New Features in 1.80

NOTE: For additional information on Helix Native 1.80, check out the latest Helix Native Pilot’s Guides, which is automatically installed with the new 1.80 software.

Snapshot Bypass

There may be situations where you don’t want Helix’s snapshots to control a particular block’s bypass state; that is, you’d prefer to turn it on and off manually. For example, you may want manual control of a boost pedal at any time without worrying whether a particular snapshot might turn it on or off.

Right-click (Mac: control-click) on a processing block and uncheck “Snapshot Bypass.” Alternatively, right-click (Mac: control-click) the Bypass button to uncheck “Snapshot Bypass.”

Hardware Compatibility Mode

Helix Native can now reflect the signal flow and model set of all Helix and HX hardware devices, so transferring presets to and from your DAW is even easier. In addition, Hardware Compatibility can be disabled entirely, so the simultaneous model count is now limited only by the speed of your computer.

  1. Open any instance of Helix Native within your DAW and click the gear icon in the lower left corner to open the Preferences window.
  2. Click the Hardware Compatibility tab.
  3. From the “Current Hardware Compatibility Mode” pull-down menu, select one of the following options:

Off

Disables Hardware Compatibility and lets you add as many blocks (of any type) as your computer’s horsepower will allow. Choose this setting if you don’t own any Helix or HX hardware

Helix Floor /LT / Rack (the default)

Configures Helix Native such that any presets made can be easily loaded into Helix Floor, Helix Rack/Control, or Helix LT

HX Effects

Configures Helix Native such that any presets made can be easily loaded into HX Effects. In this mode, no Amp or Cab models will be available

HX Stomp

Configures Helix Native such that any presets made can be easily loaded into HX Stomp

  1. Click OK. Depending on the current Hardware Compatibility Mode, Helix Native may repopulate the preset list to reflect that of the selected hardware. For example, if you choose “HX Stomp,” HX Stomp’s factory presets will appear and the signal flow will be limited to six blocks
  2. Click “Set as Default” to ensure any new instances of Helix Native open in the selected mode.

IMPORTANT! Each Hardware Compatibility Mode incorporates its own, independent preset library. Therefore, you will see the Helix Native preset library automatically repopulate to reflect that of the selected hardware.

Helix / HX Preset Sharing

All Helix and HX hardware and software now live within the same ecosystem. Using multiple instances of Helix Native, both blocks and entire presets can be freely dragged and dropped or copied and pasted between units. Aside from the obvious caveats below, all Helix and HX products can now share the same content.

IMPORTANT! Due to the vast differences in how Helix/HX products manage controllers, snapshots, and Command Center messages, there is no guarantee that every single tiny detail of a preset will translate properly.

You can now drag / drop, copy / paste, or otherwise load:

HX Effects or HX Stomp presets into Helix Floor / Rack / LT and Helix Native. If an HX Effects preset has 9 blocks, the ninth block will be routed to Path 2

Helix Floor / Rack / LT, Helix Native, or HX Stomp presets into HX Effects. However, there are caveats.

To avoid an error message, the source preset must:

  • Contain 9 or fewer blocks
  • Not contain any Amp+Cab, Amp, Preamp, or Cab blocks
  • Contain no more than one Split and Merge block
  • Fit within one path worth of DSP processing

Helix Floor / Rack/LT, Helix Native, or HX Effects presets into HX Stomp. However, there are caveats. To avoid an error message, the source preset must:

  • Contain 6 or fewer blocks
  • Contain no more than one Split and Merge block Fit within one path worth of DSP processing

Helix Floor / Rack/LT, HX Effects, or HX Stomp presets into Helix Native

NOTE: A dialog box will appear if the source preset cannot be accommodated by the current Hardware Compatibility Mode (see above). At this point, you may choose to switch the current Hardware Compatibility Mode to that of the source preset, or attempt to translate the preset into the current Hardware Compatibility Mode, given the caveats above. See the Helix Native Pilot’s Guide for more information. Click the question mark icon in the lower left corner of the plug-in.

Undo/Redo

Helix Native now supports multiple levels of undo/redo.

  1. Click the Undo button to undo the most recent edit.
  2. Click the Redo button to redo the most recent undo.

MIDI Learn

Helix Native can now learn an incoming MIDI CC message and automatically assign it to a parameter.

  1. Right-click on a parameter and select Controller > MIDI Learn. A small brain icon flashes. If you change your mind, click the icon to cancel.
  2. Send Helix Native a MIDI CC message. The parameter is automatically assigned to it.

TIP: In Helix Native, right-click (Mac: control-click) on a processing block to open a pull-down that lets you manually assign a MIDI CC to block bypass. Right-click (Mac: control-click) on a parameter slider to open a pull-down menu that lets you manually assign a MIDI CC to parameter control.

NOTE: Not all DAW software automatically routes incoming MIDI data through to any plug-in, especially those instantiated as an insert on an audio track. See your DAW’s documentation for more information. The new MIDI In indicator in the lower right corner flashes if Helix Native receives MIDI data.

Other Changes and Improvements in 1.80

On a Cab > Dual block, changing the first cab no longer changes the second cab.

Impulse Response blocks now display as many IR file name characters as will fit in the inspector header

Additional values have been added to recall snapshots remotely via MIDI CC69 Value 8 will select the next snapshot and Value 9 will select the previous snapshot

A small indicator in the lower right corner of the plug-in window flashes whenever a MIDI message is received

Automation and MIDIcontroller assignments can now be managed together from the AutomationController Assign tab

Blocks assigned to controllers or automation now display their category name in brackets. Parameters assigned to controllers or automation display a small icon to the left of their parameter sliders. In addition, pop-up menus now display controller or automation assignments, if any

From the Automation/Controller Assign tab, right-click (Mac: control-click) an assignment to open a pull-down menu, letting you clear one or all assignments

A new “Restore Factory Settings” button has been added to the bottom of the Preferences window

Wow, you’re still reading this? Congratulations; you’re way cooler and better looking than other Helix/HX owners. Celebrate your superiority with some delicious tacos.

As Ampeg is now Line 6’s sister company, all pre-1.80 Ampeg models have been renamed:

Amp > Bass > Tuck n’ Go is now called “Ampeg B-15NF

Amp > Bass > SV Beast Nrm is now called “Ampeg SVT Nrm

Amp > Bass > SV Beast Brt is now called “Ampeg SVT Brt

Cab > 1x15 Tuck n’ Go is now called “1x15 Ampeg B-15

Cab > 4x10 Rhino is now called “4x10 Ampeg HLF

Cab > 8x10 SV Beast is now called “8x10 Ampeg SVT E

Numerous stability and performance improvements Lots of other little things

Known Issues in 1.80

Downgrading to 1.71 or older will erase ALL preset data.

A preset may load blank after dragging a looper block across a split, merge and another block two times. Simply load the preset again and it will load as expected.

Undo/Redo does not work when switching between time and note divisions.

Save to Library lists presets in “01A-32D” setlist format regardless of preferences.

Compatible OS: Mac OS X, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra, macOS Mojave
( 39 MB )

Get Download




Helix Native      
Helix Native
Version 1.71
Released 12/5/18

Works with:
No Hardware Required

Helix Native 1.71 

New Features

Block Drag and Drop—Individual blocks in Helix Native can now be dragged and dropped between it and HX Edit or another Helix Native instance/panel

Paste Before and Paste After—Blocks copied to the clipboard can now be inserted before or after the selected block. Right-click a block and select "Paste Before" or "Paste After”

Improvements/Changes

Quick Clear—Hovering your mouse over a block again displays a small “x” icon. Click the icon to clear the block 

Bug Fixes

• In Pro Tools, the compare function would load only the selected preset — FIXED

• In Logic Pro X, after moving an instance of Helix Native to another channel strip location, the compare state could sometimes reverse — FIXED

• In Final Cut Pro, the master input and output sliders could load at -120dB — FIXED

Compatible OS: Mac OS X, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra, macOS Mojave
( 35 MB )

Get Download




Helix Native      
Helix Native
Version 1.71
Released 12/5/18

Works with:
No Hardware Required

Helix Native 1.71 

New Features

• Block Drag and Drop—Individual blocks in Helix Native can now be dragged and dropped between it and HX Edit or another Helix Native instance/panel

• Paste Before and Paste After—Blocks copied to the clipboard can now be inserted before or after the selected block. Right-click a block and select "Paste Before" or "Paste After”

Improvements/Changes

• Quick Clear—Hovering your mouse over a block again displays a small “x” icon. Click the icon to clear the block 

Bug Fixes

• In Pro Tools, the compare function would load only the selected preset — FIXED

• In Logic Pro X, after moving an instance of Helix Native to another channel strip location, the compare state could sometimes reverse — FIXED

• In Final Cut Pro, the master input and output sliders could load at -120dB — FIXED

Compatible OS: Windows 7, Windows 8, Windows 10
( 27 MB )

Get Download




Helix Native      
Helix Native
Version 1.70
Released 10/16/18

Works with:
No Hardware Required

New Features (Helix Native 1.70)

Marketplace support—Marketplace is a new online destination that lets users purchase presets and impulse responses created by select third-party content gurus. From the lower left-hand corner Helix Native, click "My Account" and then choose "Get More Presets..." or "Get More IRs..."

Bug Fixes

• Helix Native only—Control/Command-click on parameter slider would not always snap to the hardware's default value — FIXED

• Many other minor bug fixes and improvements


Compatible OS: Mac OS X, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra
( 34 MB )

Get Download




Helix Native      
Helix Native
Version 1.70
Released 10/16/18

Works with:
No Hardware Required

New Features (Helix Native 1.70)

• Marketplace support—Marketplace is a new online destination that lets users purchase presets and impulse responses created by select third-party content gurus. From the lower left-hand corner Helix Native, click "My Account" and then choose "Get More Presets..." or "Get More IRs..."

Bug Fixes

• Helix Native only—Control/Command-click on parameter slider would not always snap to the hardware's default value — FIXED

• Many other minor bug fixes and improvements

Compatible OS: Windows 7, Windows 8, Windows 10
( 27 MB )

Get Download




Helix Native      
Helix Native
Version 1.60
Released 7/2/18

Works with:
No Hardware Required

Helix Native 1.60 “The Spring Cleaning Update”

Helix Native delivers the same award-winning HX amp and effects modeling found in Line 6’s best-selling Helix hardware guitar and effects processors, bringing authentic tone to your favorite DAW.

Helix Native is available as a fully functional 15-day free trial, which requires a Line 6 account.

Learn more at http://line6.com/helix/helixnative.html.

New Amp Models (2)

  • Cali Texas Ch1, based on* the clean channel of the MESA/Boogie® Lonestar
  • Placater Clean, based on* the clean channel of the Friedman BE-100

New Effects Models (3)

  • Distortion > Deranged Master (Mono, Stereo), based on* the Dallas Rangemaster Treble Booster—WARNING! Like the real thing, this model will take your head off! Works best before a distorted amp
  • Distortion > Deez One Vintage (Mono, Stereo), based on* the BOSS© DS-1 distortion pedal (classic Made-in-Japan version)
  • Distortion > Deez One Mod (Mono, Stereo), based on* the BOSS© DS-1 distortion pedal (Keeley mod version)

* All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6.

New Features

  • MIDI block bypass—Helix Native now lets you bypass individual blocks via MIDI. Right-click (or Control-click) the desired block and from the pull-down menu, select MIDI Bypass > MIDI In. Then click the Automation/Controller Assign tab and choose the desired CC#. Note that there are lots of CCs that Helix Native will ignore, as these are reserved for Helix hardware functionality. See the Helix Native Pilot’s Guide for more information
  • MIDI parameter control—Helix Native now lets you control parameters via MIDI. In the inspector, right-click (or Control-click) the desired parameter and from the pull-down menu, select Controller Assign > MIDI CC. Then click the Automation/Controller Assign tab and choose the parameter from the list. Adjust the MIDI CC#, Min, and Max Values
  • MIDI snapshot select—To select a snapshot in Helix Native, send it a MIDI CC#69 message. Value 0 will recall Snapshot 1, Value 1 will recall Snapshot 2, Value 2 will recall Snapshot 3, and so on
  • Block Copypaste between Helix Native and HX Edit/—Helix Native now lets you copy and paste individual blocks between plugin multiple instances and HX Edit. Right-click (or Control-click) the desired block and select Copy. Then switch to HX Edit and on the Signal Flow view, right click on the destination block (or an empty block location) and select Paste
  • Helix Native now lets you copy and paste individual blocks after closing and then reopening the plugin window
  • Helix Native now lets you copy and paste individual blocks between multiple instances

Improvements/Changes

  • The most recent new HX Reverb models have been tweaked to sound notably wetter (see Known Issues below)
  • When changing the Time parameter, Legacy delay models now exhibit a more organic behavior (like DL4 and Echo Pro)
  • Helix, Helix Rack/Control, Helix LT only: Variax Shuriken bank names now appear in the Input > Multi and Input > Variax block without requiring connection to Variax Workbench
  • Plug-in window now loads faster
  • Many under-the-hood improvements

Bug Fixes

  • DSP intensive presets with one or more Placater Amp+Cab, Amp, or Preamp blocks can sometimes generate an error message — FIXED
  • The Filter > Legacy > Obi Wah model is mono (should be stereo) — FIXED
  • Modulation > Legacy > Analog Chorus > Mode parameter was mislabeled “CH Vib” — FIXED
  • PitchSynth > Legacy > Smart Harmony > Key parameter was mislabeled “V1 Key” — /FIXED
  • Attempting to import a very long Impulse Response can sometimes result in Helix Native freezing — FIXED
  • Clearing all setlists and presets does not clear preset names until the plugin window is closed and reopened — FIXED
  • In some cases, tempo changes may not be properly recalled when Tempo is set to Per Snapshot — FIXED
  • Moving the Merge > Mixer block to Path B and then moving it back to its original position on Path A can result in an error message — FIXED
  • In some cases, Path 2B’s input cannot be set to Host — FIXED
  • Many other minor bug fixes, optimizations, and stability improvements

Known Issues

  • As the new HX Reverb models have been tweaked to sound notably “wetter”, any existing user presets that use these models will sound different. Although Helix and HX hardware has the ability to compensate for changes made to models when rebuilding presets (and one of our goals is to rarely if ever cause audible changes to existing user presets), the improvements made to the reverb blocks unfortunately cannot be compensated for.
  • * In ProTools, the Compare function only loads the selected preset.
  • In Logic 10.4.1, after moving an instance of Helix Native to another channel strip location, the Compare state can sometimes reverse.
  • The DAW’s Compare function toggles between the two previously loaded presets, instead of toggling any edits made to the preset.
  • A processing block cannot be moved between a Split or Mixer and another processing block.
  • In Logic, switches 13-16, Master Input/Output, and Snapshot Index parameters are missing from the Automation lane list.

HAVE A GREAT IDEA FOR HELIX NATIVE?

If you have a great idea for Helix Native, we want to hear about it! Please visit *http://line6.ideascale.com* to post your requests and suggestions, or vote for features. This is the most direct way for you to influence our updates, and we look forward to hearing from you!

Compatible OS: Windows 7, Windows 8, Windows 10
( 27 MB )

Get Download




Helix Native      
Helix Native
Version 1.60
Released 7/2/18

Works with:
No Hardware Required

Helix Native 1.60 “The Spring Cleaning Update”

Helix Native delivers the same award-winning HX amp and effects modeling found in Line 6’s best-selling Helix hardware guitar and effects processors, bringing authentic tone to your favorite DAW.

Helix Native is available as a fully functional 15-day free trial, which requires a Line 6 account.

Learn more at http://line6.com/helix/helixnative.html.

New Amp Models (2)

  • Cali Texas Ch1, based on* the clean channel of the MESA/Boogie® Lonestar
  • Placater Clean, based on* the clean channel of the Friedman BE-100

New Effects Models (3)

  • Distortion > Deranged Master (Mono, Stereo), based on* the Dallas Rangemaster Treble Booster—WARNING! Like the real thing, this model will take your head off! Works best before a distorted amp
  • Distortion > Deez One Vintage (Mono, Stereo), based on* the BOSS© DS-1 distortion pedal (classic Made-in-Japan version)
  • Distortion > Deez One Mod (Mono, Stereo), based on* the BOSS© DS-1 distortion pedal (Keeley mod version)

* All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6.

New Features

  • MIDI block bypass—Helix Native now lets you bypass individual blocks via MIDI. Right-click (or Control-click) the desired block and from the pull-down menu, select MIDI Bypass > MIDI In. Then click the Automation/Controller Assign tab and choose the desired CC#. Note that there are lots of CCs that Helix Native will ignore, as these are reserved for Helix hardware functionality. See the Helix Native Pilot’s Guide for more information
  • MIDI parameter control—Helix Native now lets you control parameters via MIDI. In the inspector, right-click (or Control-click) the desired parameter and from the pull-down menu, select Controller Assign > MIDI CC. Then click the Automation/Controller Assign tab and choose the parameter from the list. Adjust the MIDI CC#, Min, and Max Values
  • MIDI snapshot select—To select a snapshot in Helix Native, send it a MIDI CC#69 message. Value 0 will recall Snapshot 1, Value 1 will recall Snapshot 2, Value 2 will recall Snapshot 3, and so on
  • Block Copypaste between Helix Native and HX Edit/—Helix Native now lets you copy and paste individual blocks between plugin multiple instances and HX Edit. Right-click (or Control-click) the desired block and select Copy. Then switch to HX Edit and on the Signal Flow view, right click on the destination block (or an empty block location) and select Paste
  • Helix Native now lets you copy and paste individual blocks after closing and then reopening the plugin window
  • Helix Native now lets you copy and paste individual blocks between multiple instances

Improvements/Changes

  • The most recent new HX Reverb models have been tweaked to sound notably wetter (see Known Issues below)
  • When changing the Time parameter, Legacy delay models now exhibit a more organic behavior (like DL4 and Echo Pro)
  • Helix, Helix Rack/Control, Helix LT only: Variax Shuriken bank names now appear in the Input > Multi and Input > Variax block without requiring connection to Variax Workbench
  • Plug-in window now loads faster
  • Many under-the-hood improvements

Bug Fixes

  • DSP intensive presets with one or more Placater Amp+Cab, Amp, or Preamp blocks can sometimes generate an error message — FIXED
  • The Filter > Legacy > Obi Wah model is mono (should be stereo) — FIXED
  • Modulation > Legacy > Analog Chorus > Mode parameter was mislabeled “CH Vib” — FIXED
  • PitchSynth > Legacy > Smart Harmony > Key parameter was mislabeled “V1 Key” — /FIXED
  • Attempting to import a very long Impulse Response can sometimes result in Helix Native freezing — FIXED
  • Clearing all setlists and presets does not clear preset names until the plugin window is closed and reopened — FIXED
  • In some cases, tempo changes may not be properly recalled when Tempo is set to Per Snapshot — FIXED
  • Moving the Merge > Mixer block to Path B and then moving it back to its original position on Path A can result in an error message — FIXED
  • In some cases, Path 2B’s input cannot be set to Host — FIXED
  • Many other minor bug fixes, optimizations, and stability improvements

Known Issues

  • As the new HX Reverb models have been tweaked to sound notably “wetter”, any existing user presets that use these models will sound different. Although Helix and HX hardware has the ability to compensate for changes made to models when rebuilding presets (and one of our goals is to rarely if ever cause audible changes to existing user presets), the improvements made to the reverb blocks unfortunately cannot be compensated for.
  • * In ProTools, the Compare function only loads the selected preset.
  • In Logic 10.4.1, after moving an instance of Helix Native to another channel strip location, the Compare state can sometimes reverse.
  • The DAW’s Compare function toggles between the two previously loaded presets, instead of toggling any edits made to the preset.
  • A processing block cannot be moved between a Split or Mixer and another processing block.
  • In Logic, switches 13-16, Master Input/Output, and Snapshot Index parameters are missing from the Automation lane list.

HAVE A GREAT IDEA FOR HELIX NATIVE?

If you have a great idea for Helix Native, we want to hear about it! Please visit *http://line6.ideascale.com* to post your requests and suggestions, or vote for features. This is the most direct way for you to influence our updates, and we look forward to hearing from you!

Compatible OS: Mac OS X, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra
( 34 MB )

Get Download




Helix Native      
Helix Native
Version 1.50
Released 2/7/18

Works with:
No Hardware Required

Helix Native 1.50 Release Notes

Helix Native delivers the same award-winning HX amp and effects modeling found in Line 6’s best-selling Helix hardware guitar and effects processors, bringing authentic tone to your favorite DAW.

Helix Native is available as a fully functional 15-day free trial, which requires a Line 6 account.

Learn more at http://line6.com/helix/helixnative.html.

NEW AMP MODELS (2)

- Cali Texas Ch2, based on* the drive channel of the MESA/Boogie® Lonestar (Ch1 coming later this spring).
- Placater Dirty, based on* the BE/HBE channel of the Friedman® BE-100 (Clean channel coming later this spring).

NEW HX EFFECTS MODELS (6)

Helix Native now includes a library of effects from M13, M9, M5, DL4, DM4, FM4, and MM4. These appear in a new "Legacy" subcategory in the model list.

- Delay > Multi Pass (Mono, Stereo), Line 6 Original
- Reverb > Glitz (Mono, Stereo), Line 6 Original
- Reverb > Ganymede (Mono, Stereo), Line 6 Original
- Reverb > Searchlights (Mono, Stereo), Line 6 Original
- Reverb > Plateaux (Mono, Stereo), Line 6 Original
- Reverb > Double Tank(Mono, Stereo), Line 6 Original

NEW LEGACY MODELS (77)

- Distortion > Tube Drive, based on* the Chandler Tube Driver.
- Distortion > Screamer, based on* the Ibanez® Tube Screamer®.
- Distortion > Overdrive, based on* the DOD® Overdrive/Preamp 250.
- Distortion > Classic Dist, based on* the ProCo Rat.
- Distortion > Heavy Dist, based on* the BOSS® Metal Zone.
- Distortion > Colordrive, based on* the Colorsound® Overdriver.
- Distortion > Buzz Saw, based on* the Maestro® Fuzz Tone.
- Distortion > Facial Fuzz, based on* the Arbiter® Fuzz Face®.
- Distortion > Jumbo Fuzz, based on* the Vox® Tone Bender.
- Distortion > Fuzz Pi, based on* the Electro-Harmonix® Big Muff Pi®.
- Distortion > Jet Fuzz, based on* the Roland® Jet Phaser.
- Distortion > Line 6 Drive, based on* the Colorsound® Overdriver (modded).
- Distortion > Line 6 Distortion, Line 6 Original.
- Distortion > Sub Oct Fuzz, based on* the PAiA Rocktave Divider.
- Distortion > Octave Fuzz, based on* the Tycobrahe® Octavia.

- Dynamics > Tube Comp, based on* the Teletronix® LA-2A®.
- Dynamics > Red Comp, based on* the MXR® Dyna Comp.
- Dynamics > Blue Comp, based on* the BOSS® CS-1.
- Dynamics > Blue Comp Treb, based on* the BOSS® CS-1 (Treble switch on).
- Dynamics > Vetta Comp, Line 6 Original.
- Dynamics > Vetta Juice, Line 6 Original.
- Dynamics > Boost Comp, based on* the MXR® Micro Amp.

- Modulation > Pattern Tremolo, Line 6 Original.
- Modulation > Panner, Line 6 Original.
- Modulation > Bias Tremolo, based on* the 1960 Vox® AC-15 Tremolo.
- Modulation > Opto Tremolo, based on* the 1964 Fender® Deluxe Reverb®.
- Modulation > Script Phase, based on* the MXR® Phase 90 (script logo version).
- Modulation > Panned Phaser, based on* the Ibanez® Flying Pan.
- Modulation > Barberpole, Line 6 Original.
- Modulation > Dual Phaser, based on* the Mu-Tron® Bi-Phase.
- Modulation > U-Vibe, based on* the Shin-ei Uni-Vibe®.
- Modulation > Phaser, based on* the MXR® Phase 90.
- Modulation > Pitch Vibrato, based on* the BOSS® VB-2.
- Modulation > Dimension, based on* the Roland® Dimension D.
- Modulation > Analog Chorus, based on* the BOSS® CE-1.
- Modulation > Tri Chorus, based on* the Dytronics® Tri-Stereo Chorus.
- Modulation > Analog Flanger, based on* the MXR® Flanger.
- Modulation > Jet Flanger, based on* the A/DA Flanger.
- Modulation > AC Flanger, based on* the MXR® Flanger.
- Modulation > 80A Flanger, based on* the A/DA Flanger.
- Modulation > Frequency Shift, Line 6 Original.
- Modulation > Ring Modulator, Line 6 Original.
- Modulation > Rotary Drum, based on* the Fender® Vibratone.
- Modulation > Rotary Drm/Horn, based on* the Leslie® 145.

- Delay > Ping Pong, Line 6 Original.
- Delay > Dynamic, based on* the TC Electronic® 2290.
- Delay > Stereo, Line 6 Original.
- Delay > Digital, Line 6 Original.
- Delay > Dig w/ Mod, Line 6 Original.
- Delay > Reverse, Line 6 Original.
- Delay > Lo Res, Line 6 Original.
- Delay > Tube Echo, based on* the Maestro® Echoplex EP-1.
- Delay > Tape Echo, based on* the Maestro® Echoplex EP-3.
- Delay > Sweep Echo, Line 6 Original.
- Delay > Echo Platter, based on* the Binson® EchoRec®.
- Delay > Analog Echo, based on* the BOSS® DM-2.
- Delay > Analog w/ Mod, based on* the Electro-Harmonix® Deluxe Memory Man.
- Delay > Auto-Volume Echo, Line 6 Original.
- Delay > Multi-Head, based on* the Roland® RE-101 Space Echo.

- Pitch/Synth > Bass Octaver, based on* the EBS® OctaBass.
- Pitch/Synth > Smart Harmony, based on* the Eventide® H3000.
- Pitch/Synth > Octi Synth, Line 6 Original.
- Pitch/Synth > Synth O Matic, Line 6 Original.
- Pitch/Synth > Attack Synth, based on* the Korg® X911 Guitar Synth.
- Pitch/Synth > Synth String, based on* the Roland® GR700 Guitar Synth.
- Pitch/Synth > Growler, Line 6 Original.

- Filter > Voice Box, Line 6 Original.
- Filter > V Tron, based on* the Musitronics® Mu-Tron® III.
- Filter > Q Filter, Line 6 Original.
- Filter > Seeker, based on* the Z Vex Seek Wah.
- Filter > Obi Wah, based on* the Oberheim® voltage-controlled S&H filter.
- Filter > Tron Up, based on* the Musitronics® Mu-Tron® III (up position).
- Filter > Tron Down, based on* the Musitronics® Mu-Tron® III (down position).
- Filter > Throbber, based on* the Electrix® Filter Factory.
- Filter > Slow Filter, Line 6 Original.
- Filter > Spin Cycle, based on* the Craig Anderton's Wah/Anti-Wah.
- Filter > Comet Trails, Line 6 Original.

* All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6.

NEW FEATURES

  • Snapshots - Helix Native now supports up to eight Snapshots per preset.
  • Drag block to clear - Click and drag a block out out of the signal flow view to clear it.
  • Dragging an amp/effect block nudges neighboring blocks out of the way to allow insertion
  • Dragging a split/join block reveals insertion points between amp/effect positions (basically the same as previous behavior).
  • Split/join positions can be nudged from any direction at any point along path A.

IMPROVEMENTS/CHANGES

  • 12 of Helix’s 17 reverbs originally appeared in M-Class processors and Verbzilla. As such, they’ve been moved into the new “Legacy” subcategory within the Reverb category.
  • Helix's tempo no longer responds to pressing TAP at tempo lower than 40.0 BPM (Beats Per Minute). This is to ensure that multiple fast tap entries are recognized properly, as previously, they could be seen as one really slow tap entry. You may still manually select a tempo all the way down to 20.0 BPM and your presets can still be saved with tempi down to 20.0 BPM.

BUG FIXES

  • If its Mid and Bass parameters are set to 0.0, the Cali IV Lead Amp/Amp+Cab model could sometimes exhibit a decrease in gain.
  • The Tempo Host Sync would be lost when reloading a session.
  • Pro Tools: Latency Compensation broken when Helix Native plugin is bypassed.

KNOWN ISSUES

  • Recalling an effect or instrument rack in Ableton Live with Helix Native instantiated can mute the track.
    Workaround: Uninstantiate and re-instantiate the plug-in.
  • When using two 1024 IR's in a preset, moving the upper IR block before or after a pre/post split block can change the sonic character of the IR block.
  • The copy/paste clipboard may be cleared after closing and reopening Helix Native.

HAVE A GREAT IDEA FOR HELIX NATIVE?

If you have a great idea for Helix Native, we want to hear about it! Please visit http://line6.ideascale.com to post your requests and suggestions, or vote for features. This is the most direct way for you to influence our updates, and we look forward to hearing from you!

Compatible OS: Windows 7, Windows 8, Windows 10
( 26 MB )

Get Download




Helix Native      
Helix Native
Version 1.50
Released 2/6/18

Works with:
No Hardware Required

Helix Native 1.50 Release Notes

Helix Native delivers the same award-winning HX amp and effects modeling found in Line 6’s best-selling Helix hardware guitar and effects processors, bringing authentic tone to your favorite DAW.

Helix Native is available as a fully functional 15-day free trial, which requires a Line 6 account.

Learn more at http://line6.com/helix/helixnative.html.

NEW AMP MODELS (2)

- Cali Texas Ch2, based on* the drive channel of the MESA/Boogie® Lonestar (Ch1 coming later this spring).
- Placater Dirty, based on* the BE/HBE channel of the Friedman® BE-100 (Clean channel coming later this spring).

NEW HX EFFECTS MODELS (6)

Helix Native now includes a library of effects from M13, M9, M5, DL4, DM4, FM4, and MM4. These appear in a new "Legacy" subcategory in the model list.

- Delay > Multi Pass (Mono, Stereo), Line 6 Original
- Reverb > Glitz (Mono, Stereo), Line 6 Original
- Reverb > Ganymede (Mono, Stereo), Line 6 Original
- Reverb > Searchlights (Mono, Stereo), Line 6 Original
- Reverb > Plateaux (Mono, Stereo), Line 6 Original
- Reverb > Double Tank(Mono, Stereo), Line 6 Original

NEW LEGACY MODELS (77)

- Distortion > Tube Drive, based on* the Chandler Tube Driver.
- Distortion > Screamer, based on* the Ibanez® Tube Screamer®.
- Distortion > Overdrive, based on* the DOD® Overdrive/Preamp 250.
- Distortion > Classic Dist, based on* the ProCo Rat.
- Distortion > Heavy Dist, based on* the BOSS® Metal Zone.
- Distortion > Colordrive, based on* the Colorsound® Overdriver.
- Distortion > Buzz Saw, based on* the Maestro® Fuzz Tone.
- Distortion > Facial Fuzz, based on* the Arbiter® Fuzz Face®.
- Distortion > Jumbo Fuzz, based on* the Vox® Tone Bender.
- Distortion > Fuzz Pi, based on* the Electro-Harmonix® Big Muff Pi®.
- Distortion > Jet Fuzz, based on* the Roland® Jet Phaser.
- Distortion > Line 6 Drive, based on* the Colorsound® Overdriver (modded).
- Distortion > Line 6 Distortion, Line 6 Original.
- Distortion > Sub Oct Fuzz, based on* the PAiA Rocktave Divider.
- Distortion > Octave Fuzz, based on* the Tycobrahe® Octavia.

- Dynamics > Tube Comp, based on* the Teletronix® LA-2A®.
- Dynamics > Red Comp, based on* the MXR® Dyna Comp.
- Dynamics > Blue Comp, based on* the BOSS® CS-1.
- Dynamics > Blue Comp Treb, based on* the BOSS® CS-1 (Treble switch on).
- Dynamics > Vetta Comp, Line 6 Original.
- Dynamics > Vetta Juice, Line 6 Original.
- Dynamics > Boost Comp, based on* the MXR® Micro Amp.

- Modulation > Pattern Tremolo, Line 6 Original.
- Modulation > Panner, Line 6 Original.
- Modulation > Bias Tremolo, based on* the 1960 Vox® AC-15 Tremolo.
- Modulation > Opto Tremolo, based on* the 1964 Fender® Deluxe Reverb®.
- Modulation > Script Phase, based on* the MXR® Phase 90 (script logo version).
- Modulation > Panned Phaser, based on* the Ibanez® Flying Pan.
- Modulation > Barberpole, Line 6 Original.
- Modulation > Dual Phaser, based on* the Mu-Tron® Bi-Phase.
- Modulation > U-Vibe, based on* the Shin-ei Uni-Vibe®.
- Modulation > Phaser, based on* the MXR® Phase 90.
- Modulation > Pitch Vibrato, based on* the BOSS® VB-2.
- Modulation > Dimension, based on* the Roland® Dimension D.
- Modulation > Analog Chorus, based on* the BOSS® CE-1.
- Modulation > Tri Chorus, based on* the Dytronics® Tri-Stereo Chorus.
- Modulation > Analog Flanger, based on* the MXR® Flanger.
- Modulation > Jet Flanger, based on* the A/DA Flanger.
- Modulation > AC Flanger, based on* the MXR® Flanger.
- Modulation > 80A Flanger, based on* the A/DA Flanger.
- Modulation > Frequency Shift, Line 6 Original.
- Modulation > Ring Modulator, Line 6 Original.
- Modulation > Rotary Drum, based on* the Fender® Vibratone.
- Modulation > Rotary Drm/Horn, based on* the Leslie® 145.

- Delay > Ping Pong, Line 6 Original.
- Delay > Dynamic, based on* the TC Electronic® 2290.
- Delay > Stereo, Line 6 Original.
- Delay > Digital, Line 6 Original.
- Delay > Dig w/ Mod, Line 6 Original.
- Delay > Reverse, Line 6 Original.
- Delay > Lo Res, Line 6 Original.
- Delay > Tube Echo, based on* the Maestro® Echoplex EP-1.
- Delay > Tape Echo, based on* the Maestro® Echoplex EP-3.
- Delay > Sweep Echo, Line 6 Original.
- Delay > Echo Platter, based on* the Binson® EchoRec®.
- Delay > Analog Echo, based on* the BOSS® DM-2.
- Delay > Analog w/ Mod, based on* the Electro-Harmonix® Deluxe Memory Man.
- Delay > Auto-Volume Echo, Line 6 Original.
- Delay > Multi-Head, based on* the Roland® RE-101 Space Echo.

- Pitch/Synth > Bass Octaver, based on* the EBS® OctaBass.
- Pitch/Synth > Smart Harmony, based on* the Eventide® H3000.
- Pitch/Synth > Octi Synth, Line 6 Original.
- Pitch/Synth > Synth O Matic, Line 6 Original.
- Pitch/Synth > Attack Synth, based on* the Korg® X911 Guitar Synth.
- Pitch/Synth > Synth String, based on* the Roland® GR700 Guitar Synth.
- Pitch/Synth > Growler, Line 6 Original.

- Filter > Voice Box, Line 6 Original.
- Filter > V Tron, based on* the Musitronics® Mu-Tron® III.
- Filter > Q Filter, Line 6 Original.
- Filter > Seeker, based on* the Z Vex Seek Wah.
- Filter > Obi Wah, based on* the Oberheim® voltage-controlled S&H filter.
- Filter > Tron Up, based on* the Musitronics® Mu-Tron® III (up position).
- Filter > Tron Down, based on* the Musitronics® Mu-Tron® III (down position).
- Filter > Throbber, based on* the Electrix® Filter Factory.
- Filter > Slow Filter, Line 6 Original.
- Filter > Spin Cycle, based on* the Craig Anderton's Wah/Anti-Wah.
- Filter > Comet Trails, Line 6 Original.

* All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6.

NEW FEATURES

  • Snapshots - Helix Native now supports up to eight Snapshots per preset.
  • Drag block to clear - Click and drag a block out out of the signal flow view to clear it.
  • Dragging an amp/effect block nudges neighboring blocks out of the way to allow insertion
  • Dragging a split/join block reveals insertion points between amp/effect positions (basically the same as previous behavior).
  • Split/join positions can be nudged from any direction at any point along path A.

IMPROVEMENTS/CHANGES

  • 12 of Helix’s 17 reverbs originally appeared in M-Class processors and Verbzilla. As such, they’ve been moved into the new “Legacy” subcategory within the Reverb category.
  • Helix's tempo no longer responds to pressing TAP at tempo lower than 40.0 BPM (Beats Per Minute). This is to ensure that multiple fast tap entries are recognized properly, as previously, they could be seen as one really slow tap entry. You may still manually select a tempo all the way down to 20.0 BPM and your presets can still be saved with tempi down to 20.0 BPM.

BUG FIXES

  • If its Mid and Bass parameters are set to 0.0, the Cali IV Lead Amp/Amp+Cab model could sometimes exhibit a decrease in gain.
  • The Tempo Host Sync would be lost when reloading a session.
  • Pro Tools: Latency Compensation broken when Helix Native plugin is bypassed.

KNOWN ISSUES

  • Recalling an effect or instrument rack in Ableton Live with Helix Native instantiated can mute the track.
    Workaround: Uninstantiate and re-instantiate the plug-in.
  • When using two 1024 IR's in a preset, moving the upper IR block before or after a pre/post split block can change the sonic character of the IR block.
  • The copy/paste clipboard may be cleared after closing and reopening Helix Native.

HAVE A GREAT IDEA FOR HELIX NATIVE?

If you have a great idea for Helix Native, we want to hear about it! Please visit http://line6.ideascale.com to post your requests and suggestions, or vote for features. This is the most direct way for you to influence our updates, and we look forward to hearing from you!

Compatible OS: Mac OS X, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra
( 31 MB )

Get Download




Helix Native      
Helix Native
Version 1.10
Released 11/20/17

Works with:
No Hardware Required

Helix Native 1.10 Release Notes

New Amps (7)

- Voltage Queen, based on* the Victoria® Electro King

- Derailed Ingrid, based on* the Trainwreck Circuits® Express

- Brit Trem Nrm, based on* the normal channel of the Marshall® Plexi Tremolo 50

- Brit Trem Brt, based on* the bright channel of the Marshall® Plexi Tremolo 50

- Brit Trem Jump, based on* the normal and bright channel (jumped) of the Marshall® Plexi Tremolo 50

- Cartographer, based on* the Ben Adrian Cartographer

- Agua 51, based on* the Aguilar® DB751 bass amp

New Effects (7)

- Distortion > Kinky Boost (Mono, Stereo), based on* the Xotic® EP Booster

- Distortion > Thrifter Fuzz (Mono, Stereo), Line 6 Original

- Dynamics > Kinky Comp (Mono, Stereo), based on* the Xotic® SP Compressor

- Modulation > Bleat Chop Trem (Mono, Stereo), based on* the Lightfoot Labs© Goatkeeper

- Modulation > Double Take (Mono, Stereo), Line 6 Original doubler

- Delay > Cosmos Echo (Mono, Stereo), based on* the Roland® RE-201 Space Echo

- Volume/Pan > Stereo Width (Stereo), Line 6 Original utility to collapse stereo paths

* All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6.

New Features

- Plug-in Window Resizing—Click and drag the lower right-hand corner of Helix Native to resize the window and view more or fewer parameters and model list items

Show/Hide PRESETS/IMPULSES List—Click the icon to the left of the preset name to show or hide the PRESETS/IMPULSES list

Bug Fixes

- In the rare case that all paths are full, it is possible to drag more blocks into them, which may result in the error “Failed to move item. (Unknown. [code -1])” -FIXED

- On rare occasions, a warning dialog may appear during AU Validation scan of other AudioUnit plug-ins -FIXED

- After updating from OS X 10.12 Sierra to OS X 10.13 High Sierra, Helix Native may not load properly in GarageBand -FIXED

- After importing an IR file in a certain instance of Helix Native, the same file may not automatically appear in subsequent instances -FIXED

- Many other minor bug fixes and optimizations

- General stability improvements

Known Issues

- Recalling an effect or instrument rack in Ableton Live with Helix Native instantiated can mute the track. Workaround: Uninstantiate and re-instantiate the plug-in

- In rare cases, clearing Helix Native’s preset library while the DAW is under high CPU loads can sometimes cause the plug-in to become unresponsive. Workaround: Close the Helix Native plug-in window and reopen

- EXP pedal assignments may not automatically be assigned

- The copy/paste clipboard may be cleared after closing and reopening Helix Native

Compatible OS: Mac OS X, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra
( 30 MB )

Get Download




Helix Native      
Helix Native
Version 1.10
Released 11/20/17

Works with:
No Hardware Required

Helix Native 1.10 Release Notes

New Amps (7)

- Voltage Queen, based on* the Victoria® Electro King

- Derailed Ingrid, based on* the Trainwreck Circuits® Express

- Brit Trem Nrm, based on* the normal channel of the Marshall® Plexi Tremolo 50

- Brit Trem Brt, based on* the bright channel of the Marshall® Plexi Tremolo 50

- Brit Trem Jump, based on* the normal and bright channel (jumped) of the Marshall® Plexi Tremolo 50

- Cartographer, based on* the Ben Adrian Cartographer

- Agua 51, based on* the Aguilar® DB751 bass amp

New Effects (7)

- Distortion > Kinky Boost (Mono, Stereo), based on* the Xotic® EP Booster

- Distortion > Thrifter Fuzz (Mono, Stereo), Line 6 Original

- Dynamics > Kinky Comp (Mono, Stereo), based on* the Xotic® SP Compressor

- Modulation > Bleat Chop Trem (Mono, Stereo), based on* the Lightfoot Labs© Goatkeeper

- Modulation > Double Take (Mono, Stereo), Line 6 Original doubler

- Delay > Cosmos Echo (Mono, Stereo), based on* the Roland® RE-201 Space Echo

- Volume/Pan > Stereo Width (Stereo), Line 6 Original utility to collapse stereo paths

* All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6.

New Features

- Plug-in Window Resizing—Click and drag the lower right-hand corner of Helix Native to resize the window and view more or fewer parameters and model list items

Show/Hide PRESETS/IMPULSES List—Click the icon to the left of the preset name to show or hide the PRESETS/IMPULSES list

Bug Fixes

- In the rare case that all paths are full, it is possible to drag more blocks into them, which may result in the error “Failed to move item. (Unknown. [code -1])” -FIXED

- On rare occasions, a warning dialog may appear during AU Validation scan of other AudioUnit plug-ins -FIXED

- After updating from OS X 10.12 Sierra to OS X 10.13 High Sierra, Helix Native may not load properly in GarageBand -FIXED

- After importing an IR file in a certain instance of Helix Native, the same file may not automatically appear in subsequent instances -FIXED

- Many other minor bug fixes and optimizations

- General stability improvements

Known Issues

- Recalling an effect or instrument rack in Ableton Live with Helix Native instantiated can mute the track. Workaround: Uninstantiate and re-instantiate the plug-in

- In rare cases, clearing Helix Native’s preset library while the DAW is under high CPU loads can sometimes cause the plug-in to become unresponsive. Workaround: Close the Helix Native plug-in window and reopen

- EXP pedal assignments may not automatically be assigned

- The copy/paste clipboard may be cleared after closing and reopening Helix Native

Compatible OS: Windows 7, Windows 8, Windows 10
( 24 MB )

Get Download




Helix Native      
Helix Native
Version 1.01
Released 9/11/17

Works with:
No Hardware Required

Helix Native Version 1.01

The new Helix® Native plug-in delivers the same award-winning HX amp and effects modeling found in the best-selling Line 6 Helix hardware guitar and effects processors, bringing authentic tone to your favorite DAW.

Helix Native is available as a fully functional 15-day free trial, which requires a Line 6 account.

Learn more at http://line6.com/helix/helixnative.html.

Download the user manual here.

GETTING STARTED

  • Supports VST3, AAX, and AU, 64-bit only. 
  • Try it for FREE for 15 days by clicking "start my 15-day free trial" on first launch (internet connection is required for the trial period)
  • Check your Authorized Devices if you can't authorize Helix Native, you might have too many authorized devices on your account
  • Presets Compatible with Helix 2.21 firmware. Make sure your Helix hardware and editor software are up-to-date before transferring presets, setlists, etc.

WHAT'S NEW

  • The Settings Window is accessed via a more easily discoverable gear icon in the bottom left of the window.
  • Import and Export bundle has moved to the Settings Window
  • CPU Optimizations under the hood to the stock cab models
  • Note Sync now stays synced when changing delay and mod models 
  • Block movement and placement has been improved

WHAT'S FIXED

  • Unfreezing Tracks and other modals dialogs under Logic Pro X no longer darken the plug-in UI.
  • Time remaining in trial no longer displays negative or invalid numbers
  • Various other bug fixes and stability improvements

KNOWN ISSUES

We're dedicated to being as transparent as possible, and here are the current known issues.

  • Cali IV Lead Amp model will decrease in gain when Mid and Bass are set to 0. This is already known to occur on Helix hardware.
  • Moving blocks while Automation is running may cause some errors during playback/record on Pro Tools.

HAVE A GREAT IDEA FOR HELIX NATIVE?

We've already received a ton of feature requests from beta users, but if you have a great idea for Helix Native, we want to hear about it! Please visit http://line6.ideascale.com to post your requests and suggestions, or vote for features. This is the most direct way for you to influence our updates, and we look forward to hearing from you! 

Compatible OS: Mac OS X, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra
( 27 MB )

Get Download




Helix Native      
Helix Native
Version 1.01
Released 9/11/17

Works with:
No Hardware Required

Helix Native Version 1.01

The new Helix® Native plug-in delivers the same award-winning HX amp and effects modeling found in the best-selling Line 6 Helix hardware guitar and effects processors, bringing authentic tone to your favorite DAW.

Helix Native is available as a fully functional 15-day free trial, which requires a Line 6 account.

Learn more at http://line6.com/helix/helixnative.html.

Download the user manual here.

GETTING STARTED

  • Supports VST3, AAX, and AU, 64-bit only. 
  • Try it for FREE for 15 days by clicking "start my 15-day free trial" on first launch (internet connection is required for the trial period)
  • Check your Authorized Devices if you can't authorize Helix Native, you might have too many authorized devices on your account
  • Presets Compatible with Helix 2.21 firmware. Make sure your Helix hardware and editor software are up-to-date before transferring presets, setlists, etc.

WHAT'S NEW

  • The Settings Window is accessed via a more easily discoverable gear icon in the bottom left of the window.
  • Import and Export bundle has moved to the Settings Window
  • CPU Optimizations under the hood to the stock cab models
  • Note Sync now stays synced when changing delay and mod models 
  • Block movement and placement has been improved

WHAT'S FIXED

  • Unfreezing Tracks and other modals dialogs under Logic Pro X no longer darken the plug-in UI.
  • Time remaining in trial no longer displays negative or invalid numbers
  • Various other bug fixes and stability improvements

KNOWN ISSUES

We're dedicated to being as transparent as possible, and here are the current known issues.

  • Cali IV Lead Amp model will decrease in gain when Mid and Bass are set to 0. This is already known to occur on Helix hardware.
  • Moving blocks while Automation is running may cause some errors during playback/record on Pro Tools.

HAVE A GREAT IDEA FOR HELIX NATIVE?

We've already received a ton of feature requests from beta users, but if you have a great idea for Helix Native, we want to hear about it! Please visit http://line6.ideascale.com to post your requests and suggestions, or vote for features. This is the most direct way for you to influence our updates, and we look forward to hearing from you! 

Compatible OS: Windows 7, Windows 8, Windows 10
( 22 MB )

Get Download




Helix Native      
Helix Native
Version 1.00
Released 8/10/17

Works with:
Helix
Helix LT
Helix Rack
No Hardware Required

Helix Native Version 1.00

The new Helix® Native plug-in delivers the same award-winning HX amp and effects modeling found in Line 6’s best-selling Helix hardware guitar and effects processors, bringing authentic tone to your favorite DAW.

Helix Native is available as a fully functional 15-day free trial, which requires a Line 6 account.

Learn more at http://line6.com/helix/helixnative.html.

Download the user manual here.

THE WAIT IS OVER!

  • At long last... We are very proud to announce that this is the first version of the Helix Native plug-in for VST3, AAX, and AU made available to the public!
  • Try it for FREE for 15 days by clicking "start my 15-day free trial" on first launch.
  • Check your Authorized Devices if you can't authorize Helix Native, you might have too many authorized devices on your account.
  • Presets Compatible with Helix 2.21 firmware. Make sure your Helix hardware and editor software are up-to-date before transferring presets, setlists, etc.

KNOWN ISSUES

We're dedicated to being as transparent as possible, and here's some not-so-great stuff that you may encounter.

  • Editing min/max for automation of a parameter slider can temporarily stop reading the automation lane.
  • Editing parameters assigned to automation can can temporarily stop reading the automation lane during playback/record.
  • Cali IV Lead Amp model will decrease in gain when Mid and Bass are set to 0. This is already known to occur on Helix hardware.
  • Unfreezing Tracks in Logic Pro X will darken the plug-in UI, just close and reopen it in the meantime.
  • Moving blocks while Automation is running may cause some errors during playback/record on Pro Tools.

HAVE A GREAT IDEA FOR HELIX NATIVE?

We've already received a ton of feature requests from beta users, but if you have a great idea for Helix Native, we want to hear about it! Please visit http://line6.ideascale.com to post your requests and suggestions, or vote for features. This is the most direct way for you to influence our updates, and we look forward to hearing from you! 

Compatible OS: Mac OS X, Mac OS Yosemite, Mac OS El Capitan, macOS Sierra, macOS High Sierra
( 27 MB )

Get Download




Helix Native      
Helix Native
Version 1.00
Released 8/10/17

Works with:
Helix
Helix LT
Helix Rack
No Hardware Required

Helix Native Version 1.00

The new Helix® Native plug-in delivers the same award-winning HX amp and effects modeling found in Line 6’s best-selling Helix hardware guitar and effects processors, bringing authentic tone to your favorite DAW.

Helix Native is available as a fully functional 15-day free trial, which requires a Line 6 account.

Learn more at http://line6.com/helix/helixnative.html.

Download the user manual here.

THE WAIT IS OVER!

  • At long last... We are very proud to announce that this is the first version of the Helix Native plug-in for VST3, AAX, and AU made available to the public!
  • Try it for FREE for 15 days by clicking "start my 15-day free trial" on first launch.
  • Where's VST2? If your DAW does not yet support the VST3 standard, like Ableton Live or Reason, be sure to check the "install VST2" checkbox during installation.
  • Check your Authorized Devices if you can't authorize Helix Native, you might have too many authorized devices on your account.
  • Presets Compatible with Helix 2.21 firmware. Make sure your Helix hardware and editor software are up-to-date before transferring presets, setlists, etc.

KNOWN ISSUES

We're dedicated to being as transparent as possible, and here's some not-so-great stuff that you may encounter.

  • Please temporarily disable your antivirus during the installation as some users have had trouble downloading or authorizing and we don't want that to happen to you too.
  • Editing min/max for automation of a parameter slider can temporarily stop reading the automation lane.
  • Editing parameters assigned to automation can can temporarily stop reading the automation lane during playback/record.
  • Cali IV Lead Amp model will decrease in gain when Mid and Bass are set to 0. This is already known to occur on Helix hardware.
  • Unfreezing Tracks in Logic Pro X will darken the plug-in UI, just close and reopen it in the meantime.
  • Moving blocks while Automation is running may cause some errors during playback/record on Pro Tools.

HAVE A GREAT IDEA FOR HELIX NATIVE?

We've already received a ton of feature requests from beta users, but if you have a great idea for Helix Native, we want to hear about it! Please visit http://line6.ideascale.com to post your requests and suggestions, or vote for features. This is the most direct way for you to influence our updates, and we look forward to hearing from you! 

Compatible OS: Windows 7, Windows 8, Windows 10
( 22 MB )

Get Download




RECENT UPDATES

Helix/HX Firmware 2.90

This free firmware update for Helix and HX hardware processors introduces a new amp model, two new cab models, six new effects models, Output and Gain Reduction meters, signal Present/Clip meters, and more.


Instructions for Updating G10 & G10S

Corrective Action required for Relay G10, Relay G10S, and Relay G10T Wireless Products Purchased Prior to February 2020


Instructions for Updating G10T Via Spider Amps

Corrective Action required for Relay G10, Relay G10S, and Relay G10T Wireless Products purchased prior to February 2020 via Spider amps


Line 6 Updater

Keep your Line 6 gear up-to-date with the latest updates.

Free Download

License Manager

Authorize and manage your purchased Line 6 Licenses.

Free Download